homeassistant

12072 readers

3 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

What device can rotate a knob and works with HA? (feddit.it)

submitted 2 months ago by Moonrise2473@feddit.it to c/homeassistant@lemmy.world

41 comments fedilink hide all child comments

I was accidentally locked out of home again, and I had to call a professional to open the lock.

But if someone was home, they could have just turned the knob of the door from inside. There's a device that can do that? It needs to do 3 full turns and it requires a bit of force to do that (armored door with iron bars that slide in every direction, so it has a big inertia to start)

I saw a ready solution on a store, the iseo x1r, but that costs 1000 euro + another 200 for the gateway (not mandatory but otherwise it uses proprietary Bluetooth protocol and so it can't talk with HA

you are viewing a single comment's thread
view the rest of the comments

[–] JaddedFauceet@lemmy.world 1 points 2 months ago* (last edited 2 months ago)

It is used to detect closing of door and lock the door once it is closed. You may need it during the initial setup. as long as it can be placed close to the door lock, it should work ok.

otherwise, once integrated with HA, you can probably use your own contact sensor and trigger door lock using HA

btw, i am using ESPHome bluetooth proxy with Switchbot