homeassistant

15092 readers

1 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Question about the Home Assistant Connect ZBT-1 (programming.dev)

submitted 4 months ago* (last edited 4 months ago) by abrahambelch@programming.dev to c/homeassistant@lemmy.world

7 comments fedilink hide all child comments

Hello everybody,

Im currently planning on migrating my smart home to Home Assistant and run the HA docker image on my home server.

Most of my devices communicate via Zigbee so I was thinking of getting the Connect ZBT-1.
I also have a few Matter/Thread devices which would be nice to integrate as well, although not necessarily in the initial migration.

I read the ZBT-1 can experimentally be used with Thread as well. Now my question is: Is it possible to buy two devices and connect to Zigbee and Thread devices simultaneously?

Maybe someone has a similar setup and would like to share their experience.

Thanks in advance and have a nice weekend!

you are viewing a single comment's thread
view the rest of the comments

[–] DeathByDenim@lemmy.world 3 points 4 months ago (1 children)

I only have the one ZBT-1 at the moment, but like you I was also thinking about getting a second for Thread (though in the form of a HA Yellow). There's this bit in the documentation for the Yellow about multiprotocol support and one of the things is that it's better to have a second wireless chip in some cases which I take to mean that you can have multiple ZBT-1, one for Zigbee and one for Thread.

For large networks it is advisable to add a second wireless chip. This allows to run Zigbee and Thread each on a dedicated wireless chip and on separate channels.

(source: https://yellow.home-assistant.io/guides/about-multiprotocol/)

[–] abrahambelch@programming.dev 2 points 4 months ago

Thanks for the link, I think it indeed looks best to use a second one then (I think I'll do some more research though). But it's interesting to see (in case of the Yellow) you could theoretically use one device for both if they operate on the same channel.