Home Improvement

9030 readers

1 users here now

Home Improvement

founded 1 year ago

MODERATORS

nichos@lemmy.world

nieceandtows@lemmy.world

Confound4082@lemmy.ml

nieceandtows@programming.dev

How do i fix this ugly hole in the wall? (sh.itjust.works)

submitted 1 year ago* (last edited 1 year ago) by csm10495@sh.itjust.works to c/homeimprovement@lemmy.world

18 comments fedilink hide all child comments

An electrician 'fixed' an issue by making this hole in a basement cinder block wall.

.. how do I put that box back in or fix the wall or something?

Inside the box are two capped (hot) wires.

The pipe seems to be copper. Doesn't bend or anything. It can't (at least easily) be pushed back in.

I had wanted to use cement paste.. but like what do I do about the box? I guess I could paste everything except the metal pipe but geez: then i still have this sketchy box hanging out.

Images: https://imgur.io/a/yBh2QBD (posted from mobile and don't think the images went through)

Any ideas?

you are viewing a single comment's thread
view the rest of the comments

[–] nomecks@lemmy.world 4 points 1 year ago* (last edited 1 year ago) (1 children)

You probably want to slip some conduit around the wire to protect it from the mortar, patch the hole, then use a surface mount box screwed to the wall with the wire fed in the back.

[–] csm10495@sh.itjust.works 1 points 1 year ago* (last edited 1 year ago) (1 children)

The wire is inside a copper pipe. The line going to the box is a copper pipe with 2 wires in it. (I think its already protected.)

[–] nomecks@lemmy.world 2 points 1 year ago

If that's the case, I'd probaby try to cut the copper pipe back, install a 90 degree fitting and do the rest of what I suggested.