this post was submitted on 13 Jul 2023
281 points (100.0% liked)
Asklemmy
43950 readers
865 users here now
A loosely moderated place to ask open-ended questions
Search asklemmy ๐
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
- Lemmyverse: community search
- sub.rehab: maps old subreddits to fediverse options, marks official as such
- !lemmy411@lemmy.ca: a community for finding communities
~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Sure thing, I have a two Sovol SV06's, one for a 0.4 nozzle and one for a 0.2 nozzle, and a Bambu Labs X1C.
The SV06's took me a few weeks to tweak, especially the one with the 0.2 nozzle.
Here is my cura profile for the Sovol SV06 with the 0.4 nozzle https://filebin.net/ljh52w2lehipzbms
Just using that outright probably won't work. What I would do is load up the default Ender 6 profile that Cura has, and then adjust settings based on mine. For instance. You went from a bowden extruder to a direct drive. So you can probably copy my retraction settings as a baseline and adjust from there. You need far less retraction on direct drive extruders (i.e. 0.2mm-1mm for direct drive vs 5mm-8mm for bowden).
I would also look up CHEP and Teaching Tech on youtube. They have great videos on bed leveling and everything else related to 3d printing.