networking

2811 readers

1 users here now

Community for discussing enterprise networks and the ensuing chaos that comes after inheriting or building one.

founded 1 year ago

MODERATORS

manifex@sh.itjust.works

Trying to connect two routers (lemmy.world)

submitted 11 months ago by WhyAUsername_1@lemmy.world to c/networking@sh.itjust.works

9 comments fedilink hide all child comments

Hi all!

I have 2 ISPs with their own routers.

Router A: 192.168.0.1/24

Router B: 192.168.20.1/24

I have my servers plugged into Router A and all my endpoint and users' devices connected to Router B.

I want users connected to Router B (192.168.20.1/24) to have access to server 192.168.0.90

I thought plugging a LAN cable and connecting Router A and Router B and then defining static routes in both routers would solve the issue.

However, at the first step itself I have an issue. When connecting the routers via a LAN cable, both routers dont get any IP.

I was also referring to this post on superuser. Though Router B is capable of creating subnet and static route, I am not sure if Router A (Archer XR500v) is capable of creating a subnet and/or a static route.

https://superuser.com/questions/1667068/connect-two-routers-with-different-subnet

you are viewing a single comment's thread
view the rest of the comments

[–] I_Miss_Daniel@lemmy.world 11 points 11 months ago* (last edited 11 months ago) (2 children)

Wouldn't it be easier just to put both routers on the same IP range and just set the gateway on the clients to be whichever router you wanted to provide internet access?

You might want to disable DHCP on the non-favoured one.

[–] WhyAUsername_1@lemmy.world 2 points 10 months ago (1 children)

This is the way I ended up doing it.

Thanks for pointing me in the right direction. :)

[–] I_Miss_Daniel@lemmy.world 2 points 10 months ago

You're welcome!

Happy 2024, and thanks for letting me know.

[–] Helix@feddit.de 1 points 11 months ago* (last edited 11 months ago)

Sounds reasonable, basically what I suggested as well.