FreeCAD

819 readers

1 users here now

Your own 3D parametric modeler.

www.freecadweb.org

FreeCAD is an open-source parametric 3D modeler made primarily to design real-life objects of any size. Parametric modeling allows you to easily modify your design by going back into your model history and changing its parameters.

founded 2 years ago

MODERATORS

zksmk@slrpnk.net

What is the point of sketching a circle when adding a "Hole" feature in Part Design? (lemmy.world)

submitted 1 year ago* (last edited 1 year ago) by Kalcifer@lemmy.world to c/freecad@lemmy.ml

1 comments fedilink hide all child comments

When I want to add a hole feature, I need to first sketch and constrain a circle where the hole is supposed to be. This would make a bit more sense if the hole actually followed the constraints of the circle, but it doesn't -- I could constrain the sketch of the circle to be one radius, and then, at the same time, specify that the hole be a completely different radius. I feel like it would make much more sense if the hole actually followed the dimensions of the sketch of the circle. If the sketch is just used for the placement of the hole, then it should be enough to simply place a point (which does not currently work -- I must sketch a circle).

Edit 1: It looks like there is an open issue for this on GitHub.

you are viewing a single comment's thread
view the rest of the comments

[–] digilec@lemmy.world 0 points 1 year ago

This is the reason I exclusively use pockets not holes. This works great for 3d-printing but wont work as well if you intend to export to CAM systems that can use a drill to make the holes.