this post was submitted on 17 Mar 2024
60 points (98.4% liked)

Home Improvement

9008 readers
58 users here now

Home Improvement

founded 1 year ago
MODERATORS
 

We have a standing shower with a strange leak. It was built with a small tiled wall/step that the frame-less glass shower wall panel sits on. I noticed water pooling outside the door after a shower. At first I thought it was the door seal but upon closer inspection it is coming out of the grout. See pics (right where the arrow is pointing). The shower was already in the house when we bought it so I don't know anything about how it was constructed.

How should I proceed trying to fix this leak? Do I need to re-do the grout? Should I just use grout sealer? Any help appreciated.

Update #1: Thanks for the help everyone. Do ya'll have any thoughts on where the water could be entering from? The silicone caulking was recently redone. My thought was that I have a hairline crack along the grout somewhere that is allowing water to wick in and and along to the outside.

Update #2: It's Fixed! Thanks everyone for the suggestions and advice. My working theory was that water was wicking down under the bottom frame and finding its way into the frame attachment holes. This appears to be what was happening. I ended up pulling out all the caulk around the inside of the shower on that side and replaced it with fresh silicone. That seems to have done the trick. Bingo, no more water on the ground!

you are viewing a single comment's thread
view the rest of the comments
[–] jimmydoreisalefty@lemmy.world 6 points 7 months ago (2 children)

Great video and shower leak, a bit similar to your own.

Shows the process of finding leak around and redoing and replacing the drain grate and drain, while also sealing them up again.

He also removes old grout around shower and adding new silicone and grout.

Quick search on shower leaks:

How to fix a tile shower leak without removing tiles - Inspire DIY Kent Thomas [10:53 | Sep 16 2020 | Inspire DIY] https://youtu.be/g6A91-y-_R4

Short Summary

  1. The video discusses the issue of a leaking shower causing water damage, mold, and potential flooring and timber damage.
  2. Kent shares his experience of fixing a leaking shower without removing any tiles.
  3. He inspects the underside of the shower to identify water damage likely caused by faulty waterproofing membrane.
  4. Kent discovers a leak around the waste pipe and proceeds to fix it by removing the drain grate and drain, cleaning out silicone blockages, and replacing the shower pan waste with a new one.
  5. Kent trims the plumbing to ensure proper water flow and uses mortar to secure the new shower waste in place.
  6. The speaker demonstrates how to properly seal and grout around a shower floor waste to ensure proper drainage.
  7. They start by tapping up the bottom of the floor waste to keep it clean for gluing the plumbing later.
  8. They apply mortar, ensure it is level with the tiles, and let it set.
  9. Next, they glue the pipes into place and remove old silicone and grout.
  10. After re-grouting, they share a homemade grout haze remover recipe, apply new silicone around the shower and floor waste, smooth it out, and seal the tiles and grout with a penetrating sealer.
[–] PipedLinkBot@feddit.rocks 3 points 7 months ago

Here is an alternative Piped link(s):

https://piped.video/g6A91-y-_R4

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[–] Debs@lemmy.zip 2 points 7 months ago (1 children)

Oh yeah. I found this guy when I was first looking into this problem. This is a super great video. He gave me the idea that maybe I just need to use a grout sealer on the water acing portion of the tile and attempt to seal up where the water is entering.

[–] jimmydoreisalefty@lemmy.world -1 points 7 months ago

Awesome!

Were you able to post an update or can you post an update on the leak problems you were/are having?