submitted 2 days ago by mrtoast72@lemmy.world to c/homelab@lemmy.ml

13 comments fedilink hide all child comments

Hey folks, I have a couple things I would like some advice on. Currently for my home network setup I have my ISP’s modem/router combo set to bridge port 1, and then some google wifi and points connected to that.

My goal is to get rid of the google home wifi and if possible my ISP’s modem/router combo (I don’t really need to replace my ISP if it makes it way more complicated) with something more open and flexible.

I have a couple dell optiplex micros I can use as a pihole/dns/whatever is needed, and I was thinking of picking up a couple of these for my WAP’s and then running the omada docker container to control them.

Would this be enough or would I also need something like openwrt running on another machine as well? If that’s the case I could also pick up this and install it into one of my dell machines so I can run some kind of router software.

TLDR- what would you buy in my situation given you only want to spend about $500 cad max on all the hardware to setup a network in your home lab?

you are viewing a single comment's thread
view the rest of the comments

[-] jet@hackertalks.com 3 points 2 days ago* (last edited 2 days ago)

True, but you can use your gateway to cut off google wifi from google, and still use the radios. No need to buy new hardware.

Heck, you can put openwrt on some google wifi models https://openwrt.org/toh/google/wifi

My advice stays the same, work with what you have first, save your budget, then SLOWLY, after doing research, buy one thing, and fit it in.

Your advice is good if you just want the fastest way to de-google yourself, but i think the OP wants to run a homelab, and learn, and understand.

[-] mrtoast72@lemmy.world 2 points 2 days ago

So to start off, I have an active home lab already going with a bunch of services running. I’m looking to strictly de-google my network. Their WAP’s have issues with connectivity and reliability and they are a pain to try and configure, google really locks down what you can do on them.

Unfortunately that software won’t work on my version of google wifi, it’s just a little to new for that.

I am actively looking to replace things and not just make what I have work anymore, wether that’s one peace at a time (just the Google stuff) or the whole networking setup.

[-] jet@hackertalks.com 0 points 2 days ago* (last edited 2 days ago)

Fair enough, can't go wrong with Ubiquiti, Mikrotik, Grandstream for radios.

[-] mrtoast72@lemmy.world 2 points 2 days ago

Good to know! I’m trying to stay away from Ubiquiti only because of their entry cost would set me back a little over $1000, but I’ll look into Mikrotik and Grandstream as well! Thank you

[-] jet@hackertalks.com 0 points 2 days ago

Depending on your requirements, you can pick up used gear for quite cheap, set alerts on craigslist/marketplace/kijiji. i.e. one access point for like $30 used, and host your own network controller container to configure it.

If you want a single pane of glass whole network management, its going to be spendy no matter which ecosystem you go with.

this post was submitted on 26 Jun 2024

8 points (100.0% liked)

homelab

6201 readers

1 users here now

founded 3 years ago

MODERATORS

CMonster@lemmy.ml