this post was submitted on 17 Nov 2024
61 points (96.9% liked)
Green Energy
2206 readers
120 users here now
Everything about energy production and storage.
Related communities:
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
While that is true for power plants with spinning turbines, it isn't true for solar power. There is no issue at all when you don't consume all the energy that a solar panel could produce.
Please expand! Why is this not an issue with solar?
With spinning turbines, the issue is, that you need to maintain a constant speed of the turbine at all times. That rotation speed directly correlates with the mains frequency of the attached generator. That's either 50 or 60 Hz depending on where you live. If the load increases the frequency drops and the turbine speed decreases, when the load decreases, the opposite happens. The people maintaining the grid have to make sure load and supply are in balance to keep the frequency stable and the trubines within their operating parameters.
Compared to that, solar panels have none of these constraints. For one, they output DC voltage not AC, and secondly they don't mind at all when there is no or very little load. So you can easily simply disconnect solar panels when there is too little demand without any issue. You can't easily do the same with a power plant with a turbine. If you were to remove the load from a turbine, you could actually destroy it, if you are not very careful.