homeassistant

12020 readers

70 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

Home Assistant Yellow unboxed to bricked in 10 minutes (lemmy.world)

submitted 1 year ago by johnnixon@lemmy.world to c/homeassistant@lemmy.world

6 comments fedilink hide all child comments

I bought a Home Assistant Yellow from the Home Assistant people so it would just work. It came with an old software version and demanded an update. 9.x to 10.x went fine. It demanded another update. 10.x to 11.0 and it's bricked. No HTTP. No SSH. No factory reset.

This is disappointing. At least I didn't even have a chance to set anything up, so things work just as well with it dead.

you are viewing a single comment's thread
view the rest of the comments

[–] andynbaker@lemmy.world 17 points 1 year ago* (last edited 1 year ago) (1 children)

I mean this in the nicest way possible, but if this threw you for a loop, you’re in for a world of hurt once you get the software up and running. It’s not rocket science, but learning to administer any Linux server will take a little time. I’m sure it’s not bricked. Consider this an opportunity to learn how to write a new disk image and interact with your new server through the console.

[–] johnnixon@lemmy.world 14 points 1 year ago* (last edited 1 year ago)

I had previously run HA on a Raspberry Pi with Z-Wave, Sonoff, and some Hue, years and years ago. After searching for a Zigbee (since that seems to be the current standard and I'm starting over) adaptor that was HA compatible, I saw they offered their own hardware. After 18 months of waiting, I figured it would "just work." Anyway, I reimaged over USB-C and it's working. I'll definitely do a backup before doing my first software update now that I have something to lose.