this post was submitted on 20 Jul 2023
24 points (100.0% liked)

3DPrinting

15541 readers
184 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

I am looking to buy a 3D printer which will be used in my small business size of about 20 people. We sometimes need little parts made for holding littles pieces of equipment and after seeing a similar lab to us use 3D Printing to make little holders for their antennas, we are looking at buying one ourselves.

What can you guys recommend? So far I have seen this video which suggests the Bambulab P1P, or the Prusa mk3S+ Kit.

I think we will most likely buy the Bambulab P1P as this guy suggests. However he did say that its not great for fixing. "Fixing or replacing parts does not appear to be anywhere near as user friendly or even possible in some cases"

How hard is it to build the Prusa mk3S+ Kit yourself in case we decide we want to have the Prusa given it is more easily fixable? We would prefer the Bambulab as it prints faster and is slightly larger, but might not get it due to the fact its not as easy to fix stuff.

you are viewing a single comment's thread
view the rest of the comments
[–] lorcster123@lemmy.world 1 points 1 year ago (1 children)

Think we might go with the p1p. The Prusa MK3S+ is 949 euros for pre built and the kit is 719 euros. But im not entirely sure we want to build it ourselves. The P1S is a few hundred more expensive than the P1P, so will have to check if its really worth it. I dont think we want to spend that much on it but if i feel the material available with the P1P is not as good as P1S, it might justidy it but probably not. Thanks for the info

[–] TooL@lemmy.ca 2 points 1 year ago* (last edited 1 year ago)

Not sure what you mean by the material available. Are you saying the material available that you'll be able to print?

If so, I can expand on this a bit. You can print PLA, PETG, and TPU absolutely flawlessly on the p1p. Far better than I was ever able to do on any of my previous printers. And unless you are going to be making parts that are going to see exposure to a lot of heat or pressure, that really should cover most of your bases.

To print stuff like ABS, ASA, or PC you'll really want an enclosure, and that goes for just about any 3D printer you get. If you do go the route of the p1p, you can actually print yourself an enclosure for fairly cheap. Look up arc or vision enclosures. That being said though, the enclose kit to convert your p1p to a p1s is only $150 which is very competitive with any self made closure when you factor in acrylic costs.

So, my recommendation, if you think you don't really need ABS or ASA, buy the p1p. It will work great for you. If you decide down the road you want to enclose it, buy the kit directly from bambulabs or print one yourself.