homeassistant

15622 readers

203 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

HA compatible sensors for a terrarium? (lemmy.sdf.org)

submitted 2 years ago by lori@lemmy.sdf.org to c/homeassistant@lemmy.world

8 comments fedilink hide all child comments

I'm in the process of building a custom terrarium that will eventually house a leopard gecko. I'm looking for some small, inexpensive devices to monitor temperature and humidity in the tank via Home Assistant so I can set up some alerts. Any recommendations?

you are viewing a single comment's thread
view the rest of the comments

[–] Shurimal@kbin.social 5 points 2 years ago (1 children)

Wouldn't any off the shelf temperature+humidity sensor work? I use Sonoff and Aqara ones with Sonoff Zigbee coordinator and Zigbee2MQTT, both are somewhere around 15€ a pop, integrate painlessly and do the job. Aqara is a bit smaller and has air pressure sensor, too.

[–] GreatAlbatross@feddit.uk 2 points 2 years ago* (last edited 2 years ago)

I agree with this, unless you paticularly want to do it yourself. You could even get a couple for redundancy for und

Sonoff SNZ02 for a small coin cell device, or Tuya if you want to use AAAs. (Tuya ones are a little cheaper too)

Edit: A bonus one if you also want a screen in the tank: Sonoff SNZB-02D.