3DPrinting

15519 readers

174 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

Sticky residue buildup in PTFE Tube (lemm.ee)

submitted 1 year ago* (last edited 1 year ago) by zevrant@lemm.ee to c/3dprinting@lemmy.world

19 comments fedilink hide all child comments

Trying to reduce the amount of constant maintenance the my ender 3 printers require and one of the biggest issues i'm having is a buildup of sticky residue inside the ptfe tube inside the hotend/ptfe tube. It's not leaking as i visually inspect before cleaning and i can see where the tube connects and there's a clear line and no visible signs of leakage. Usually some rubbing alcohol and a scrub brush will fix the issue for about 100hours of print time before needing to clean it again.

I'm wondering if i might need to reduce the flow rate on the printers or maybe i'm missing something. Running this with a direct drive extruder so the ptfe tube is pretty short and since the residue is building up inside the heater and nozzle too i don't think that's the issue.

Things i have tried:

less heat printing at 200 instead of 205 - marginal / no difference
printing speed turned down to 20mm/s - it takes longer for the buildup to become an issue but it also takes as long for the prints to complete
lowered retraction distance i thought the high retraction distance might be causing issues, while it made it better now i have stringing to deal with

EDIT: Added requested Photos -> https://imgur.com/a/XPKGI7D

you are viewing a single comment's thread
view the rest of the comments

[–] zevrant@lemm.ee 1 points 1 year ago* (last edited 1 year ago) (1 children)

the 7mm was a holdover from before i moved the extruder over to be mounted onto the x axisi don't care so much about strining that's simple to fix it's the heatbreak clogging that's the issue. As mentioned above, it's not an issue with improper bowden seating as the residue is only inside the heatbreak and not where the ptfe tube sits. Also the ptfe tube is factory cut so definitely not the issue there. Nozzle does not push against the hotend tube as it sits on top of the heatbreak and does not go all the way through.

I'm thinking probably heat creep but turning down the temps should have helped with that.

there are pics please look at the imagur link.

I cannot post the pictures directly as the site is broken and i get a 400 invalid json error.

in case you didn't notice the edit: https://imgur.com/a/XPKGI7D

[–] rambos@lemmy.world 1 points 1 year ago

Is this your hotend?

You moded your hotend by any chance?