283

Don't run out of memory (lemmy.dbzer0.com)

submitted 3 months ago by Sonotsugipaa@lemmy.dbzer0.com to c/linuxmemes@lemmy.world

16 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[-] EddyBot@feddit.de 34 points 3 months ago

because swap does other things than "extending" your physical ram

[-] PrefersAwkward@lemmy.world 18 points 3 months ago

I think the question is: if a person is going to make such a tiny swap, why even use swap?

Such a small swap is unlikely to save a system from memory problems and it's does not seem likely to make a noticeable difference in performance when it's only able to swap out small amounts of memory.

Why wouldn't one just put in larger ZRAM or a larger Swap with a reduced swapiness?

If I have a raspberry pi with 1 GB ram, I don't think a 2 MB swap is worth bothering with.

[-] marcos@lemmy.world 15 points 3 months ago

Swap is not intended to save a system from memory problems. And absolutely not fit for that purpose.

And if you are using that memory, it will make a noticeable difference in performance.

But for it to have any impact at all, you need the default (high) swapiness. If you reduce it, that partition will become useless.

Anyway, I don't recommend you put any swap at your PI's SD card.

[-] PrefersAwkward@lemmy.world 8 points 3 months ago

I wouldn't put swap on an SD card, no. Even if it had an NVME, it seems like putting up at least a double-digit percent would be more effective than 1%.

Also, since 6.1, swap has been a lot better, with MGLRU. ChromeOS gets away with paltry amounts of RAM due to swapping. So classic overcommitting seems fine as long as you don't run into situations where more RAM is active at once than is available by hardware.