this post was submitted on 19 Apr 2024
258 points (98.1% liked)

Linux

48317 readers
666 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
 

Whether you're really passionate about RPC, MQTT, Matrix or wayland, tell us more about the protocols or open standards you have strong opinions on!

you are viewing a single comment's thread
view the rest of the comments
[–] domi@lemmy.secnd.me 2 points 7 months ago

So OP is correct, it does apply a measure of security. Port scanning someone behind NAT isn't possible, you just end up port scanning their crappy NAT router provided by their ISP unless they have specifically opened up some ports and directed them to their internal IP address.

You end up just port scanning their crappy router on IPv6 as well because ports that are not opened are stuck at the firewall either way, no matter if you use IPv4 or IPv6.

Just because every device gets a public IP does not mean that IP is publicly accessible.

An advantage that IPv6 has against port scanning is the absurdly large network sizes. For example, my ISP gives me a /56 prefix, that is 4,722,366,482,869,645,213,696 IPv6 addresses. Good luck finding the used ones with the port open you need.

Even with just a /64 prefix you get 18,446,744,073,709,551,616 addresses, way outside the feasibility of port scanning.