Free and Open Source Software

17916 readers

84 users here now

If it's free and open source and it's also software, it can be discussed here. Subcommunity of Technology.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

Gaywallet@beehaw.org

alyaza@beehaw.org

Bandwidth/Traffic Monitoring Options (beehaw.org)

submitted 1 year ago by Naate@beehaw.org to c/foss@beehaw.org

18 comments fedilink hide all child comments

I've been getting repeated emails from my ISP about "exceeding my bandwidth cap" and they feel very incorrect.

My current router is a Cisco RV260, and it doesn't have a great way of tracking traffic. (There's a port traffic screen that does give tx/rx bytes, but no way to see any date ranges).

Is there anything out there that can give an accurate account of Internet traffic? It would be nice if I could see destination domain/IPs, just for kicks and giggles, but an overall traffic count is all I really need.

Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] towerful@beehaw.org 1 points 1 year ago (1 children)

My home box ran for a few years with no issues, until I started having DNS issues. I'm fairly certain that was unbound and the blocklists I had selected, tho.
I set up a Cron job to update the block lists every night, and give unbound service a restart.
It's been solid since then, and my DNS issues have disappeared.

Now, I am checking for updates and installing those every few months. So it gets a restart when that happens.

You could get a refurbished SFF computer that has a low profile PCIe slot, and put an Intel 4 port network card in it.
Would probably cost $150 tops. And its a solid entry! Certainly, that's what I used before I bought one of the fanless network appliance type things.

[–] Naate@beehaw.org 1 points 1 year ago (1 children)

I have my old Athlon fx lying around. Needs a case, psu, and the nic... Hmmmm

[–] towerful@beehaw.org 1 points 1 year ago

Might be a little old? Not sure, you would have to research it.
I'm not well versed in what pfSense/opnSense needs, which is why I threw r630s at a project that mattered.
Some cheapo refubed i3 with an Intel NIC card would do. I just suggested the SFF refurb because a lot of people like low power (and SFFs are generally low power)