254

Time to pull some more fiber (lemmyonline.com)

submitted 11 months ago* (last edited 11 months ago) by xtremeownage@lemmyonline.com to c/selfhosted@lemmy.world

33 comments fedilink hide all child comments

Since, my doctor recommend that I put more fiber in my diet- I decided to comply.

So.... in a few hours, I will be running a few OS2 runs across my house, with 10G LR SFP+ modules.

Both runs will be from my rack to the office. One run will be dedicated for the incoming WAN connection (Coupled with the existing fiber that.... I don't want to re terminate). The other, will be replacing the 10G copper run already in place, to save 10 or 20w of energy.

This, was sparked due to a 10GBase-T module overheating, and becoming very intermittent earlier this week causing a bunch of issues. After replacing the module, links came back up and started working normally.... but... yea, I need to replace the 10G copper links.

With only twinax and fiber 10G links plugged into my 8-port aggregation switch, it is only pulling around 5 watts, which is outstanding, given a single 10GBase-T module uses more then that.

Edit,

Also, I ordered the wrong modules. BUT... the hard part of running the fiber is done!

top 32 comments

sorted by: hot top controversial new old

[-] Mongostein@lemmy.ca 10 points 11 months ago

Question: How do you run this without destroying your walls? I’m not planning on doing it, but I have an Ethernet connection that my landlord put in when he redid the basement, but I can’t picture how it would be done otherwise.

[-] xtremeownage@lemmyonline.com 17 points 11 months ago

I have a crawlspace, I can go straight through the floor. I also already have a nice tight grommet for routing cables to/from the server closet too, which makes it pretty easy to run more cables.

I will say, one of the really nice things around having a crawlspace, it makes it effortless to run cabling across the house.

I am not very good at doing sheetrock, and especially not good at re-texturing the sheetrock, as such, I typically rely on floor grommets hidden out of sight, and out of mind.

[-] sicjoke@lemmy.world 16 points 11 months ago

The effort of achieving this in the average UK house is so much more than what I am guessing is OPs American house.

Crawlspaces don’t exist and we replaced sheetrock for double skinned solid brick walls.

[-] xtremeownage@lemmyonline.com 8 points 11 months ago

It also depends on the area too. Generally, the higher quality houses are a solid foundation without a crawlspace.

And- don't make it sound like you get the short end of the stick! Having a solid house built from double-brick walls sounds fantastic, compared to my house built with 2x4s, which are not even 2"x4". Especially, when we get a ton of very strong wind....

Had a 100mph wind gust recently, knocked off half of the roofs in my town.___

[-] Semi-Hemi-Demigod@kbin.social 3 points 11 months ago

I lived in a hundred-year-old row home and I feel your pain. I had to rent a hammer drill to run Ethernet to my office, which was draped along the outside of my house.

[-] sicjoke@lemmy.world 2 points 11 months ago

Did the same. Three story townhouse. To run Cat6 from top to bottom I went out, round the side of the house, up the wall, and back in.

[-] Mongostein@lemmy.ca 2 points 11 months ago

Ahhh gotcha! You should document and post the process. I’d love to see it!

[-] xtremeownage@lemmyonline.com 10 points 11 months ago

I have quite a bit of it already documented!

Might be worth a read.

Although, will note, the 40G project is quite a bit more interesting then these 10G runs. I did also run 100G a year or so back, but, never posted anything on it, due to a ton of firmware issues on the 100GBe nics.

[-] dot20@lemmy.world 3 points 11 months ago* (last edited 11 months ago)

Interesting blog!

Clicked on your NAS article (one of the first linked ones) and spotted an error... you write that Synology NAS boxes don't use standard RAID, but they do. They have official docs up on how to hook them up to a standard Linux system for disaster recovery (it's just Btrfs or ext4 on mdadm RAID).

Probably not super relevant for you or most readers, but just thought I'd point it out :)

[-] xtremeownage@lemmyonline.com 3 points 11 months ago

Interesting, was not aware of that.

I am going to assume you found the post regarding the 500$ closet NAS I built a few years ago.

One of the driving reasons behind the inclusion of that, was actually taking a jab at drobo units, which after failure.... which, while recoverable, takes a decent amount more effort then just plugging the drives in elsewhere.

[-] dot20@lemmy.world 1 points 11 months ago

Yeah Synology is pretty good with that kind of stuff (we use one at work). They've really just got a Linux system with custom management tools on top. Of course for DIY purposes, self-building is still cheaper and more flexible though.

[-] xtremeownage@lemmyonline.com 1 points 11 months ago

I might have to give them another evaluation.

My current issue... is just the amount of energy needed to run this bulk storage array.... I need to identify a solution that allows me to have a large number of drives, good performance, AND low energy usage.

[-] xtremeownage@lemmyonline.com 3 points 11 months ago

Doublepost- but, here ya go!

Only took, oh, around 10 minutes, since I already have holes / grommets in place. Just- run the cable, staple it up, and done!

[-] Mithre@lemmy.world 2 points 11 months ago

When I helped my father run ethernet in my family's home, we ran cables up to the attic, dropped them down to specific rooms between the walls, then drilled holes for panels as needed.

[-] Omega_Jimes@lemmy.ca 5 points 11 months ago

I've never used OS2, but I'm pretty experienced with OS2/Warp!

[-] SynnAckk@lemmy.p3nguin.org 4 points 11 months ago

Looks like you've got SR optics there, or are those in the picture for something else?

[-] xtremeownage@lemmyonline.com 6 points 11 months ago* (last edited 11 months ago)

Shit, glad you caught that...

I ordered the wrong modules...

But, I should have a pair of LR modules around here somewhere.... hopefully.

Double shit, I don't have any LR optics. On the plus side, the hard part is over...

[-] twei@feddit.de 1 points 11 months ago

Arent SR modules okay for your run length? It doesn't look like you have >300m (ca. 2 football fields if you are american) from your rack to your office

[-] xtremeownage@lemmyonline.com 1 points 11 months ago* (last edited 11 months ago)

Yup, SR modules would have been perfectly fine to use. However, they don't work over SMF.

LR modules "MIGHT" work over MMF, but, SR modules won't work over SMF.

I mistakenly thought my WAN connection came in with LC-LC LR too, instead, it runs over GPON.

Just wanted to do something a tad different, since I already have a ton of MMF ran around here.

[-] ihavenopeopleskills@kbin.social 3 points 11 months ago

Couldn't agree more. As we age it's important that we take a more proactive approach towards caring for our well-being. It's an investment in our respective future quality of life.

[-] interloper@lemmy.world 3 points 11 months ago

What made you go with single mode over multimode?

I assume distance, just wondering how big your house is haha.

[-] xtremeownage@lemmyonline.com 4 points 11 months ago

My WAN connection, is a no-brainer, as it is already single-mode.

Regarding the connection to my switch back here though- since I was already ordering the single-mode regardless, I went ahead and decided to run it single-mode too.

[-] interloper@lemmy.world 3 points 11 months ago

That makes sense!

I've never really looked into running fibre into my house.

But when I worked in a DC I laid a lot of fibre so we didn't really think too deeply on what to use except for distance and bandwidth, unless the network team had a specific reason.

Good to know!

I have fibre to my house but only 1G so no point switching just yet.

[-] xtremeownage@lemmyonline.com 5 points 11 months ago

Its not a necessity for me, however, I do lots of interesting networking experiments in my lab.

A good example, is my 40G networking project

So, this is mostly just playing around, but, it does have a few benefits. Power savings is one of them.

[-] interloper@lemmy.world 1 points 11 months ago

Yeah makes complete sense, cheers I'll check that link out!

[-] Caboose@lemmy.world 1 points 7 months ago

Are you using a switch on the way in?

[-] xtremeownage@lemmyonline.com 1 points 7 months ago

Yes.

[-] TheInsane42@lemmy.world 1 points 11 months ago

Was thinking of going the same route, as my employer threw away a couple of good working 10G optic sfps, but alas, only 1 of my 2 netgear switches supports sfp+ modules. (Couldn't even get a simple 1.25G utp sfp to work in it)

[-] xtremeownage@lemmyonline.com 1 points 11 months ago

I have a 100$ or so mikrotik here in the office, which is on the other end of that fiber. Its not at all picky on module choice.

Also- neither my brocade nor unifi aggregation switch are picky on modules. They have so far, taken every module I have tried.

The Intel X520-based daughterboard for my r730 though, its extremely picky. Gotta be intel/dell.

[-] TheInsane42@lemmy.world 1 points 11 months ago

The Netgear 324 I have is picky (seems to support only SFP, not SFP+, the 724 was gifted and accepts the 1.25G UTP module. I also have a Cisco 3560 24P with 2 sfp ports. No clue yet if that works correctly and how much power it'll use, but I can test with a short fiber cable I have (when it's not damaged to much) Also, no clue yet how I'd route the fiber trough the house, 4 floors up, 1 across and then 1 down. (about 15-20m) I have cat6 throughout the house, but that's a tad less fragile.

[-] eleitl@lemmy.ml 1 points 11 months ago

I'm only missing a hole in the wall to do the same -- and I could be running a 2x 40G link!

But the switch idles at 80 W and a starting jet noise level, so the hole in the wall will wait.

[-] xtremeownage@lemmyonline.com 2 points 11 months ago

Must be an ICX-6610. I miss mine, but, it had to go due to noise/power/heat.

I still have my 40G link, but, its just running point to point directly from my gaming PC to my NAS.

load more comments

this post was submitted on 28 Jul 2023

254 points (100.0% liked)

Selfhosted

37741 readers

427 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago

MODERATORS

HybridSarcasm@lemmy.world

HybridSarcasm@lemmy.hybridsarcasm.xyz