this post was submitted on 27 Nov 2024
14 points (100.0% liked)

Science

13034 readers
28 users here now

Studies, research findings, and interesting tidbits from the ever-expanding scientific world.

Subcommunities on Beehaw:

Be sure to also check out these other Fediverse science communities:

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
alyaza@beehaw.org
Gaywallet@beehaw.org
remington@beehaw.org
14
Is it possible to dig all the way through the Earth to the other side? (theconversation.com)
submitted 15 hours ago by tardigrada@beehaw.org to c/science@beehaw.org
3 comments fedilink hide all child comments
 

When digging a pit, one way to prevent the walls from collapsing inward under pressure is to make them less steep, so they slant outward like the sides of a cone. A good rule of thumb is to make the hole three times wider than its depth.

[...]

Suppose you were to try digging through the Earth, and that the planet was all solid. (We know that it’s not, but this is the simplest scenario.) The depth of a hole all the way through the planet would be equivalent to Earth’s diameter, which is just a name for a line that passes straight through the center of a circle. So your hole would need to be about three times as wide as the diameter of the Earth in order for it to be stable.

Clearly, this is an impossible task that would completely alter the planet’s shape.

[...]

top 3 comments
sorted by: hot top controversial new old
[–] Kolanaki@yiffit.net 9 points 15 hours ago* (last edited 15 hours ago) (1 children)

If there was a hole that went from one side of the earth, through the middle, to the other side and was safe for humans to be in: How much would they be charging to jump in? And how long would it take to fall all the way through?

[–] Hamartiogonic@sopuli.xyz 8 points 15 hours ago

That’s roughly how open pit mining works. In some mines, you start with a pit, but later make a mine shaft if you need to go even deeper.

A pit is relatively cheap to start with, but it becomes more expensive as you go deeper. Eventually, a traditional mine shaft becomes cheaper than continuing with a pit.

If you have a ridiculously deep mine shaft, you begin to run into various problems like walls collapsing and the temperature increasing. There can also be lots of water you need to pump out constantly.

Eventually, the shaft becomes so deep and the problem so large, that continuing becomes a nightmare. That’s why even the deepest mines aren’t really that deep considering how thick the tectonic plates are.