19

So I have an Astrolux MF01S with the extended battery tube and recently it wouldn't turn on after not having really used it in a bit due to moving. I put all the cells into my XTAR VC8 and one of the cells wasn't recognized by the charger. I used a multimeter and it's not reading any voltage from that cell (reads appropriate voltage from other cells). Is there anything to do or is this cell just dead for some reason? I believe they're the samsung 30Q's that are generally recommended.

top 5 comments
sorted by: hot top controversial new old
[-] cmnybo@discuss.tchncs.de 6 points 4 months ago

Are you using protected cells? They will read zero volts if the protection circuitry cuts off the output. You need a charger that always outputs voltage to reset those. Those super cheap USB powered chargers work great for that. A bench power supply can also be used if you are careful.

[-] JokklMaster@lemmy.world 2 points 4 months ago

No the 30Q's are unprotected. I believe that's what the MF01S requires.

[-] eceforge@iusearchlinux.fyi 2 points 4 months ago

I keep a little wire next to the charger to tap the positive lead of the shutoff battery to the working battery right next to it in the charger. The chargers already connect the negatives so just a quick tap on the positive brings them back.

[-] actionjbone@sh.itjust.works 3 points 4 months ago

Even quality cells can be faulty. Is it still under warranty?

There are ways to revive dead cells, but you might not get the same lifespan out of it.

[-] JokklMaster@lemmy.world 1 points 4 months ago

I guess I'll have to check. I honestly can't remember when I got it but it was probably over a year ago.

this post was submitted on 24 Feb 2024
19 points (100.0% liked)

flashlight

2752 readers
25 users here now

Portable illumination

Rules:

  1. Be excellent to each other
  2. Don't be the reason we need to make more rules

Related:

founded 1 year ago
MODERATORS