283
submitted 4 months ago by petsoi@discuss.tchncs.de to c/linux@lemmy.ml
top 25 comments
sorted by: hot top controversial new old
[-] const_void@lemmy.ml 36 points 4 months ago

Really loving seeing more hardware supporting and shipping with open-source firmware.

[-] Valmond@lemmy.mindoki.com 25 points 4 months ago

I imagine open source boot software being better than closed source (a real no brainer) but whats the difficulties with the open one? I'm not very versed in those very low level things.

[-] ___@lemm.ee 42 points 4 months ago

The difficulty is getting closed source hardware manufacturers to adopt it.

[-] Pantherina@feddit.de 27 points 4 months ago

All those blobs in there need to be reverse engineered. As there are not that many people doing it, this hardware is often a decade old

[-] AlexJD@feddit.uk 17 points 4 months ago

Not entirely the case anymore. Libreboot switched to a blob reduction policy in order to support more hardware. Hopefully this will bring things forward quite a bit over the next year.

[-] MigratingtoLemmy@lemmy.world 2 points 4 months ago

Unless they support the newer platforms, it will remain a niche product. I've come to accept a compromise between binary blobs and FOSS bootloader, and the path that Libreboot has chosen is great for the community, so we'll wait and watch

[-] mariusafa@lemmy.sdf.org 25 points 4 months ago* (last edited 4 months ago)

If you want to install this please DO NOT USE THE CH341A programmer. That fucking shit has the internal control signals and data signals at 5V and the bios chips usually work at 3.3V or lower.

The CH341A is defective by design and the Chinese manufacturers don't care. There are fixes online, but still the chip works badly.

If you want to install libreboot, please use any other option given at Libreboot docs. I lost too many hours because of the fucking Chinese ch341a. Which I solved quickly with a pi pico board.

In any case do not use this guy's video as an example. The instructions of the video ARE WRONG and you may fry your bios. Don't be fooled by this youtuber confidence. Follow the docs.

I've installed it on a x220.

[-] TimeNaan@lemmy.world 4 points 4 months ago

You can get a 3.3V adapter for the CH341A.

[-] mariusafa@lemmy.sdf.org 1 points 4 months ago

I did that my self (fixed the chip), the cables and everything shiped with it are trash.

[-] TimeNaan@lemmy.world 1 points 4 months ago

I agree about the accessories, they're crap but cheap to replace with better ones. And then the programmer works very well.

[-] PipedLinkBot@feddit.rocks 1 points 4 months ago

Here is an alternative Piped link(s):

video

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[-] gofsckyourself@lemmy.world 24 points 4 months ago
[-] saud@lemmy.ml 9 points 4 months ago

It's to scare away proprietary firmware

[-] sadreality@kbin.social 6 points 4 months ago

Is this usable on any normie gamer mobos?

[-] infeeeee@lemm.ee 10 points 4 months ago

You can find the list of supported hardware here: https://libreboot.org/docs/hardware/

There are some mobos, most of them are from prebuilt desktops.

I found only one "gamer": Gigabyte GA-G41M-ES2L from 2009, Socket 775, supports Core2Extreme, that was a beast 15 years ago.

But any other mobo can be used as a gaming mobo, usually they have standard ports and and newer ones tend to follow standard ATX sizes. Front IO ports usually use different configuration, but you can still use it in a case, possible that only the onoff button will work, no leds and reset, that's good enough

[-] sadreality@kbin.social 1 points 4 months ago

Thank you for a thorough reply.

Looks like this will need few years to mature. God willing it will support for more modern situations over next few years. I would deff consider my upgrade around mobo that supports FOSS BIOS.

[-] possiblylinux127@lemmy.zip 4 points 4 months ago* (last edited 4 months ago)

I use a System76 laptop and I wish they took a stronger stance on freedom.

[-] fruitycoder@sh.itjust.works 3 points 4 months ago
[-] possiblylinux127@lemmy.zip 3 points 4 months ago

I wish System76 was focused on foss more.

[-] jjlinux@lemmy.ml 6 points 4 months ago

I'm confused. What part of their software is not FOSS? They use CoreBoot for Bios, PopOS is based on Ubuntu and Cosmic is open source too. Do you mean that they still use Nvidia cards in some of their devices?

[-] possiblylinux127@lemmy.zip 4 points 4 months ago

The CPUs require non-free software to boot and function. That's very hard to get around but it would be interesting if at some point they built a device based on ARM with a chip set that is free.

On top of that they use Intel WiFi which needs non-free software to work. Ubuntu, pop os and Fedora all ship proprietary software in the kernel to make it work. Admittedly the number of free WiFi cards are limited so maybe it was about tradeoffs.

[-] jjlinux@lemmy.ml 2 points 4 months ago

Thanks for sharing this, I was completely unaware that those drivers were proprietary. Maybe I need to rethink my hardware choices then. Back to the drawing board.

this post was submitted on 26 Feb 2024
283 points (99.3% liked)

Linux

45443 readers
1090 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS