3DPrinting

15276 readers

112 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

506

Print failed successfully! (lemmy.world)

submitted 1 year ago by spckls@lemmy.world to c/3dprinting@lemmy.world

42 comments fedilink hide all child comments

Turned on retraction speed to 11 and i guess it wore down the filament at one part but then managed to push it after some 10 minutes of spaghetti 👌

you are viewing a single comment's thread
view the rest of the comments

[–] FredericChopin_@feddit.uk 1 points 1 year ago (1 children)

I have a BLTouch but still have issues. I do feel maybe a sturdy table is needed.

[–] chris@l.roofo.cc 2 points 1 year ago* (last edited 1 year ago) (1 children)

A few tips that made my prints much better:

Check if your rollers are tight enough. None of the axes should wobble if you pull on them
Use a PEI sheet for printing
Clean the PEI Sheet with Soap and Water at least once
Clean with IPA after every print
Don't touch the print bed. The oil on your skin really doesn't help with sticking.
Get yourself a metal feeler gauge with 0.2mm. Level your bed heat nozzel and bed to your normal print temp an then move the nozzel 0.2 mm above the bed. Adjust your Z Offset until you can get the metal gauge undr the nozzle but still feel it touching. that should be your perfect height
If you still have problems try all the steps here one after another: https://teachingtechyt.github.io/calibration.html

I used to have a lot of problems with parts lifting up or my prints being unclean but since I did this my prints look great and stick to the bed.

[–] FredericChopin_@feddit.uk 1 points 1 year ago

Thanks for these tips. The next time I’m motivated to print something I’ll definitely take this on board.