this post was submitted on 18 Sep 2023
720 points (99.0% liked)

3DPrinting

15770 readers
926 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

cross-posted from: https://lemmy.world/post/5265624

I made this about a year ago and it's one of my favorite creations. Even though I made a mistake in measuring the bottom and had to cut out some slots. One day I'll print it again, but it used a ton of filament and took forever last time.

you are viewing a single comment's thread
view the rest of the comments
[–] canthidium@lemmy.world 2 points 1 year ago (1 children)

Yeah, it will harden way too fast to do that. Like the other commenter said, use glue to stick them together, then you can weld the seams, and also add some extra filament if you want a smoother seam. I just welded that print as it's all held in pretty tight in the drawer. There's almost no gap around the outside at all. I just welded and there is a visible seam, but it's minor and I don't need it to be perfectly smooth. If you wanted it to be perfectly smooth, I'd add filament and then sand it flat and possibly paint if you felt inclined.

As far as strength, like I said for this print it didn't need to be, but it really depends on what you're making. Use your best judgement, CA glue bonds very well. I use clear gorilla glue myself. It doesn't expand like normal gorilla glue. But yeah, I use a combination usually depending on what it is. Like I said, just use your best judgement and definitely keep the parts together and weld along the seam instead of melting and trying to stick together, lol.

[–] Anticorp@lemmy.ml 2 points 1 year ago (1 children)

Thanks for all of the tips! Sticking multiple pieces together has been a real sticking point for me.

[–] canthidium@lemmy.world 2 points 1 year ago