this post was submitted on 04 Dec 2023
16 points (100.0% liked)

homeassistant

12239 readers
141 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
16
Correct way to control Sidewalk Heating Mats (self.homeassistant)
submitted 1 year ago by Buelldozer to c/homeassistant@lemmy.world
6 comments fedilink hide all child comments
 

I ordered some sidewalk heating mats from HeatTrak and I want to automate them with HA so that they come on when it makes sense to do so based on the data from my Tempest Weather Station.

According to HeatTrack my mats will have a combined resistive load of 5A which is well within the spec of the Zooz ZEN05 or ZEN14, both rated for 15A resistive loads, but when I asked them about it they did not recommend using either of them with heated mats. They couldn't, or wouldn't, explain why and it doesn't make sense to me why this wouldn't work.

My next thought was to simply swap the outlet to something smart but this is an outdoor outlet so it needs to be GFCI and there's essentially no Z-Wave GFCI outlets made.

Do I really need to use something like an Enbrighten Z-Wave Plus 40-Amp contactor for this or am I missing something here?

you are viewing a single comment's thread
view the rest of the comments
[–] v1605@lemmy.world 1 points 1 year ago

I've had no issues with zooz products, if I had to guess I'd say they are trying to cover themselves from an automation starting a fire. Those two outdoor plugs are also not rated for below freezing, so the Enbrighten seems like a better fit.