this post was submitted on 05 Jun 2023
3 points (100.0% liked)

Technology

37602 readers
548 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
 

Curious what you've got installed on it. What do you use a lot but took awhile to find? What do you recommend?

you are viewing a single comment's thread
view the rest of the comments
[–] paulie420@beehaw.org 1 points 1 year ago

Theres plenty of replies with options of decent, current NAS setups - so I'll reply with my 1st NAS instead...

You could start with a Pi-NAS to save a lot of $$coin$$... start with a Raspberry Pi 4 8GB; it has gigabit ethernet, so it meets that baseline... since you'll be running over the USB-3 BUS regardless, you can get away with buying cheap USB drives; there are many brands, but Western Digitals are pretty cheap... they go up to like 40GB now a days, but 4TB drives are only $100 or so... I went with two 8TB drives. Its better, IMO, to go with the larger 3.5" versions because they come with external power supplies. I found with the smaller 2.5" drives, the Pi could only power one sucking power over USB...

I used no RAID, as you have to jump thru a few extra hoops to get RAID setup over drives on the USB-3 bus... backup was done thru my Proxmox PBS server - but we're not here for the safe backup talk, right?

All this was running OpenMediaVault, which is a pretty decent NAS software. It has support for all the connection types you want - and believe it or not, I also ran Plex in docker and got decent results; while I wasn't able to do any transcoding, wireless playback worked quick enough for me - and I could even watch movies remotely...

I mention this setup b/c a 16TB Pi-NAS can be had for $300, all in... you can see speeds of 100MB/s but I found 40-50MB/s was an average because of WiFi or other bottlenecks.

Its cool to have options when building a NAS; I've since moved my NAS to a Proxmox VM on my Dell Poweredge server, but the Pi-NAS ran without fail for four years...

  • pAULIE42o
  • . . . . . . . . . . .
  • /s