[-] Gordon@lemmy.world 3 points 4 days ago

So beautiful

30

Basically title, this symbol is on the tires of my new (to me) CAAD12. Are the tires on backwards? The right side of the picture is the front of the bike, the left side is the rear. This is the front tire. Another picture below showing which way the tread is facing. The tread "looks" right, it appears it would channel water away from the center correctly.

[-] Gordon@lemmy.world 27 points 3 months ago

I haven't read every single reply but the vast majority say probably not.

My experience is basically the opposite of everyone here. I bought a refurbished gaggia classic for $275 in like 2012 or so. I use it daily. It's not hard to use, and in fact my 5 year old can pull a shot all by himself.

There is a comment that for the same prep home espresso won't be as good as commercial because the machine quality is lower.

I'm sorry but IMO this is 100% wrong.

As long as there's nothing wrong with your machine, water, or beans, there's no difference. The goal of an espresso machine is to supply 9 bars of pressure. The coffee doesn't care if the machine cost $400, $4000, or even $12,000.

The reason commercial machines are so expensive is really twofold. Mainly they are built to be able to pull shot after shot all day every day for decades. The second thing is that commercial machines are pretty much universally multi group dual boiler setups where you can steam and pull 3 shots at the same time. So not only do commercial machines require the highest quality stuff, but they need 3, 4 or more copies of everything.

But again the goal of the machine is to supply heated water at 9 bars of pressure. The results will be the same in any machine that can accomplish this goal, the cost difference basically boils down to how nice the machine is to use, and what extra features it has.

The grinder on the other hand makes a huge difference. But, you don't have to spend a ton to match cafe quality. A baratza encore will do the job but not well. Step up to the sette and you will be able to get close.

Lastly is the beans. Now this is an area that you will have to research, but I found a local roaster that mainly sells to local cafes and hotels, but is also is open to the public. His coffee is fresh and I really enjoy it.

The last thing is that tricky statement "for the same amount of prep."

Cafes pretty much do the very minimum. Press a button on the grinder, get a volumetric dose that should be within 1.5g or so, quickly tamp, pull a shot, and move on to the next customer. I've even started seeing mechanical automatic tampers being used.

You on the other hand will (likely) be weighing beans with sub gram accuracy, checking the machine temperature, carefully distributing the grounds, carefully tamping or maybe using a calibrated tamper... Etc.

You will be putting in more prep just simply because you have to. You don't have the equipment that cafes do that will make the process as easy as pushing 2-3 buttons. But that's okay. If you enjoy espresso you will enjoy the process and it'll become a hobby more than anything.

But that last part is the key. Are you willing or ready for espresso to become a new hobby? Yes? Buy a machine. No? Keep using aero press. Or do some else. Only you know what you want.

[-] Gordon@lemmy.world 26 points 3 months ago

Little Renault Tables we call him.

[-] Gordon@lemmy.world 35 points 4 months ago

Flight instructors don't want you to know this one simple trick.

[-] Gordon@lemmy.world 31 points 8 months ago

First left, then right.

2FA just took an unexpected turn.

[-] Gordon@lemmy.world 51 points 8 months ago

My state of residence restricts access to certain sites. It's all bullshit.

Anyway... The ISP is either a common carrier or a content provider. Pick a fucking lane. You can't have half and half. Either you are responsible for ALL content provided or NONE.

If you choose none then you MUST NOT restrict access to any content.

If you chose ALL then you may restrict content based on what you are willing to take responsibility for. But in that case if someone does something illegal with content you provided you are liable.

23

I got the when travelling abroad for work in Morocco. I paid about 20 USD for them from a street vendor.

Some more pics

bottom view

side view

[-] Gordon@lemmy.world 23 points 9 months ago

I had a review recently where I expressed my frustration at excessive work and unreasonable or un-communicated deadlines, and my boss basically took the stance that how was he supposed to know I was overloaded if I wasn't working a bunch of overtime?

Like, dude, that's NOT going to happen. I can be overloaded AF but I'm still leaving at 4.

We talked in circles about this for about 30 minutes and I don't think he understood or simply refused to understand.

Whatever.

[-] Gordon@lemmy.world 22 points 9 months ago

You think you are being a smartass but that's exactly what heat pumps do. The only functionality difference between an AC unit and a heat pump is a reversing valve.

But without a reversing valve you could put your AC unit in backwards and heat your house in the winter.

The whole premise of an AC unit is to take the heat from inside the house and put it outside, leaving you with cooler air inside.

So in the winter a heat pump simply reverses the flow of the freon and moves the heat from outside to inside. Yes. You are "cooling the whole neighborhood" when you run a heat pump.

[-] Gordon@lemmy.world 27 points 10 months ago

The star wars universe is intentionally "post-apocalyptic" "star-punk". The star trek universe is post scarcity utopia. Hmmm. I wonder which one has better tech?

3

Basically title: What is the preferred or most efficient way of cleaning light colored key caps?

I'm guessing that putting the whole keyboard in the dishwasher is probably out.

Do you all just pull all the keys and clean them with a towel or something in a mild soap solution?

This would give me a good chance to be disgusted by all the hair and junk that accumulates between the keys too, so there's that.

Thanks for the help, and sorry for the newbie question, but someone's gotta ask them.

[-] Gordon@lemmy.world 32 points 10 months ago

Or garlic TBH

[-] Gordon@lemmy.world 58 points 1 year ago

Not understanding the marginal tax rate.

1
submitted 1 year ago by Gordon@lemmy.world to c/3dprinting@lemmy.ml

Hey all, so this is the biggest thing I've tried to print. I'm using PETG. I'm getting a lot of repetitive bands of underextrusion that seem to stack up and get worse as the print progresses.

What do you think is causing this? Is this just an inherent thing in the way an Ender 3 works by moving the bed?

view more: next ›

Gordon

joined 1 year ago