OfficeMonkey

joined 2 years ago
sorted by: new top controversial old
Recommendation for 10gb PCI-E NIC? in c/buildapc@lemmy.world
[–] OfficeMonkey 2 points 6 days ago (1 children)

The estimate I've seen is that cards won't be coming until 2026, otherwise yeah, this would be an easy choice.

5
Recommendation for 10gb PCI-E NIC? (self.buildapc)
 

Switch: 10Gb RJ45 Router: 10GB RJ45 NAS: 10Gb RJ45

Seems a shame to not have 10G-baseT on my desktop.

I have an older home built machine, built on a MSI Tomahawk B450. I'm not looking to upgrade at the moment, but I have an empty PCIe 2.1 x16 slot.

I don't expect to be able to guarantee 10Gb ethernet speeds with my motherboard and CPU, but I'd like to get close. I've seen that Intel X540 NICs don't have any power saving/thermal modes, so they should be avoided. Aquantia apparently was acquired be Marvell and basically ignored to death -- and the AQC113 has rumors of an unfixable bug that sometimes leads to it not being recognized at system boot. Realtek doesn't have a chips/boards available yet, and Broadcom costs two arms, two legs, and three noses.

Any suggestion on what to get? Bonus for PCIe 2.1x16 over PCIe 3x8, really want to stay under $100US.

Better than last time in c/lemmyshitpost@lemmy.world
[–] OfficeMonkey 23 points 2 weeks ago (1 children)

(East) Berlin would dispute the example for Deutschland. Ampelmann is an icon.

This gives me an idea in c/programmer_humor@programming.dev
[–] OfficeMonkey 17 points 3 weeks ago (1 children)

My spouse came home from a week at the hospital to a stupid button I hooked up that messaged me "Emergency! {name} needs you!"

It was perfect.

I replaced my iPhone with an e-paper Android handset - here's my verdict after a month in c/android@lemdro.id
[–] OfficeMonkey 4 points 1 month ago

My partner has one - and still loves it while on the fourth of a few models (over seven years). I can barely use it -- my fingers are too large. The camera isn't great and the white balance is just incorrect.

The battery life is understandably atrocious. But -- it is TINY.

I just watched Speed Racer(2008). It's a masterpiece. in c/movies@lemmy.world
[–] OfficeMonkey 2 points 1 month ago

This is a good summary of my experience of both Speed Racer and Jupiter Ascending (although the latter has Eddie Redmayne chewing scenery like it was going out of style).

[likely solved] What are these wires on this water tower? What is their purpose? in c/whatisthisthing@lemmy.world
[–] OfficeMonkey 1 points 1 month ago

Base jumping. Funding is difficult, so the local water utility has started charging admission. €10 for access to the lines, and €20 to clip on.

Pets Sunday - how are they doing? in c/casualconversation@lemm.ee
[–] OfficeMonkey 4 points 1 month ago (1 children)

Not that bright, but REALLY cute.

DOGE's cringy "dank meme" campaign in c/Mirror@50501.chat
[–] OfficeMonkey 7 points 1 month ago

"Dogezone." Completely normal. Everything's fine.

What the heck is this nonsense.

Protest even if Musk steps down. in c/Mirror@50501.chat
[–] OfficeMonkey 3 points 2 months ago

fElon has to step down. He is a "special government employee" and limited to 130 days.

What are some lesser-known obscure TV series that went under the radar, that you would recommend? in c/Television@lemm.ee
[–] OfficeMonkey 5 points 2 months ago

LORD Bowler.

*Permanently Deleted* in c/politics@lemmy.world
[–] OfficeMonkey 10 points 2 months ago

The bill has a poison pill -- it allows Trump to shift funding. So yes, judges on vacation bad, but the bill effectively authorizes the behavior of the meme department.

How many eggs for that tessera? in c/microblogmemes@lemmy.world
[–] OfficeMonkey 27 points 2 months ago (1 children)

I had thought this was a photoshop. WTH.

16
Req: newcomer guide to SLA printing? (self.3dprinting)
 

I just received an unexpected SLA printer from what I had assumed was a failed Kickstarter for the "Coolsiga FinderOne" or C1 or Classic. The manual is clearly intended for someone who has some context, but my past experience has been entirely FDM based.

I'm not claiming it's a good manual by any stretch of the imagination, nor am I confident that it will work -- but is there an "Dummies Guide to SLA Printers" I can read through to at least know what it's talking about?

32
First level printing too tall (lemmy.today)
 

Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday).

I'm printing first level at 0.3mm thickness, but the print is irregularly too thick in height -- and not by a little bit, a lot. I've lowered the temperature to 190. I've physically lowered the bed to the point that the skirt didn't print, then raised it just barely back. I've reduced the flow rate to 85%, and I'm still getting the same results. I've lowered the build plate temperature, no change.

The skirt might be a tough high in spots, but I'm ending up with the first level of a prime tower that looks like this.

Any ideas? What else can I try?

view more: next ›