this post was submitted on 06 Jun 2025
23 points (96.0% liked)
Technology
39044 readers
324 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Those use a lithium ion cell, so they have a buck converter to step the voltage down to 1.5V, which will always use some power. They are not suitable low draw devices because of the high self discharge rate. They can't be used in high draw devices because the buck converter can only supply a limited amount of current. They also produce noisy power which can cause issues with radios and audio equipment. The USB port and charge circuitry take up a lot of space, so you get less capacity too. A low self discharge NiMH cell will be better for almost any use.
This appears to be a 14500 lithium ion cell (same physical size as AA), putting out 3.7v for a device like this flashlight that supports it. No voltage step down, just charging circuitry on-board.