1411
Wait, not like that (lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
[-] TankovayaDiviziya@lemmy.world 24 points 3 months ago

Chad rest of the world: We only use imperial system to measure pizza, height, body waist and dicks.

[-] LaVacaMariposa@mander.xyz 29 points 3 months ago

What part of the rest of the world does that?

I'm from the rest of the world that would measure all those things in centimeters. I think only screen sizes and some tools would be in inches

[-] t0fr@lemmy.ca 11 points 3 months ago
[-] ulterno@lemmy.kde.social 8 points 3 months ago

screen sizes

Where I'm from, even that has a cm rating right next to it.

[-] strawberrysocial@lemmy.world 4 points 3 months ago* (last edited 3 months ago)

Canada is one of those "rest of the world places". Officially uses metric but the general population here (unless they are recent immigrants or work in the medical field) will tell you their height in feet and inches, their weight in lbs, they will tell you a recipe using Fahrenheit. Pizza is measured in inches. If you buy food, like deli meat, it is displayed in grams on the scale but a lot of people will ask for a half lb or whatever still. We use km for speed but we still use square footage if you are selling a house. Unless they are boomers or older, we will use Celsius for the weather though. I remember growing up learning metric and it was fine, everything made sense, then when I hit college was forced to learn American imperial for my job field cuz that's what the American standard was. I hate that I think in inches and feet for a lot of crap now. It's irritating switching back and forth depending on what you are doing.

[-] hemko@lemmy.dbzer0.com 3 points 3 months ago* (last edited 3 months ago)

There's ton of weird niche stuff. Mostly cycling related here but you get the point...

Bicycle pedal axle thread size
Bicycle wheel and tire sizing (actually metric standard but inches in common language)
Also wheel size on cars
Bicycle steerer tube diameter
10mm qr axle diameter on hubs (3/8" actually)
25.4mm handlebar clamp diameter sounds oddly familiar...

[-] wfh@lemm.ee 1 points 3 months ago

Most proper denim pants are sized in inches, even from non-US countries.

But of course vanity sizing is a thing so a size 36 is closer to 38in unless explicitly specified, and most online retailers provide true sizing in cm anyway, so there's that.

[-] blind3rdeye@lemm.ee 1 points 3 months ago

In Australia it's fairly common to see pizza sizes in inches. The body stuff not as much, but sometimes.

[-] jol@discuss.tchncs.de 13 points 3 months ago* (last edited 3 months ago)

I guess also bike wheel sizes, screens sizes. Height and body waist? Are you talking about the UK? Europe only uses inches for products that have certain expected sizes.

[-] JK_Flip_Flop@lemmy.world 13 points 3 months ago* (last edited 3 months ago)

(may be a bit of an off topic rant)

The cluster fuck that is the UK's measurement system can be easily summarised by looking at fueling a car.

You fill your car from a pump that sells you litres of fuel. Then your car reports its fuel economy in miles per gallon.

How the fuck am I supposed to relate the 40 litres of diesel that I just bought to the 35 MPG on my dashboard without a fucking calculator?

I fucking hate it here. It's the exact same British exceptionalism that brought us fucking Brexit.

[-] Buelldozer 5 points 3 months ago

Then your car reports its fuel economy in miles per gallon.

Is that Imperial or US Gallons? 😉

[-] JK_Flip_Flop@lemmy.world 5 points 3 months ago

Who the fuck knows honestly? ¯\_(ツ)_/¯

!Imperial!<

[-] BakerBagel@midwest.social 2 points 3 months ago

And yet you call Americans dumb for not adopting the metric system. Why would we think we would do a better job than you? I would much rather use the system my grandpa grew up with rather than use the hybrid abomination that the UK uses.

[-] 9point6@lemmy.world 4 points 3 months ago* (last edited 3 months ago)

I suppose the thinking is that you lot might learn from the mistakes of others

Though you're possibly right, that's maybe a bit too charitable

[-] JK_Flip_Flop@lemmy.world 3 points 3 months ago

I'm a Scottish nationalist and republican (in the British sense). It's one of my pipe dreams to see an independent Scotland adopt the metric system fully but I kinda doubt it will ever happen.

[-] John_McMurray@lemmy.world 1 points 3 months ago* (last edited 3 months ago)

How long you been there you ain't figured out 4 and half liters in a gallon? you bought 8 3/4 gallons.

[-] fishbone@lemmy.world 1 points 3 months ago

It's about 3.8 liters to a gallon (for a total of about 10.55 gallons).

[-] John_McMurray@lemmy.world 2 points 3 months ago

Nah, he said he was in England. The Imperial gallon is 4.5 liters. Ounces are smaller (40 in a quart) but the pints are bigger

[-] fishbone@lemmy.world 2 points 3 months ago* (last edited 3 months ago)

Wild, I didn't know there was a different gallon measurement (There's a few apparently).

mostly unrelated, but after poking around on Wikipedia, I've also learned that there's two different versions of fluid ounces (Edit: that are used actively in the US, forgot to add that), and both are used on food labels simultaneously, but relating to different things.

https://en.wikipedia.org/wiki/Fluid_ounce#Definitions_and_equivalences

US food labeling fluid ounce

For serving sizes on nutrition labels in the US, regulation 21 CFR §101.9(b) requires the use of "common household measures", and 21 CFR §101.9(b)(5)(viii) defines a "common household" fluid ounce as exactly 30 milliliters. This applies to the serving size but not the package size, package sizes use the US customary fluid ounce.

[-] John_McMurray@lemmy.world 2 points 3 months ago* (last edited 3 months ago)

I suspect that might relate to the smaller english/canadian fluid ounce and imports. they're very close, you only start to easily see a difference around 5 ounces. I run a bar in Canada, and i catch inspectors and suppliers constantly playing fast and loose with Imperial and American standards ounces and pints. Canadian law saws if you are serving a pint of beer, it has to be a proper Imperial pint of 20 ounces, from the big English gallon, if you call it a pint. you can serve any size you want if you don't call it a pint. i constantly see competitors passing off 16 American ounces as a pint. The revenue guys check that your dispensing machines are putting out an ounce but won't tell you whether they are using a Imperial or Standard ounce, i'm pretty sure they're using American ounce devices when they shouldn't be. Supposedly we're a metric country but liquor and cattle definitely aint.

[-] JK_Flip_Flop@lemmy.world 1 points 3 months ago

I'm the one that doesn't want to learn anything then you drop an "England" on me? I'm Scottish or does that not matter because is it too much for you to learn that the UK is more than England?

[-] John_McMurray@lemmy.world 0 points 3 months ago

The difference of Scotland, Wales, and England matters to you and maybe the French. To people on another continent talking about measurement systems...well,,,I'm aware Scotland has their own passport. If you want me to know you're at at a Scottish gas station, say that. I'm sorry, but Scotland didn't run a giant empire for 200 years, England did. It's kinda funny you live in one of the very few countries the English never conquered and no one cares.

[-] JK_Flip_Flop@lemmy.world 0 points 3 months ago

I do know that but my point is that I shouldn't have to know that. Imperial fluid measurements outside the pint aren't used anywhere else in my life.

[-] John_McMurray@lemmy.world 1 points 3 months ago

Oh God forbid you learn something. Are you made every country hasn't switched to English too?

[-] JK_Flip_Flop@lemmy.world -1 points 3 months ago

My brain is filled with far too much shite about measurements. I love all of it. I'm a great lover of odd and obscure imperial units. Please don't try to tell me I don't want to know.

[-] John_McMurray@lemmy.world 1 points 3 months ago

The fuck? You literally said you don't want to.

[-] JK_Flip_Flop@lemmy.world 2 points 3 months ago

"shouldn't have to" ≠ "don't want to*

[-] John_McMurray@lemmy.world 1 points 3 months ago

they look the same to me

[-] Dudewitbow@lemmy.zip 3 points 3 months ago

and surprising fun fact, TVs

[-] KrokanteBamischijf@feddit.nl 1 points 3 months ago

Television screens, hard drive sizes, PCB dimensions, car tires, rims, nails (though they're usually 9 inches)?

And bicycle parts... for some reason. Might be a UK thing.

this post was submitted on 01 Apr 2024
1411 points (98.7% liked)

memes

8685 readers
2382 users here now

Community rules

1. Be civilNo trolling, bigotry or other insulting / annoying behaviour

2. No politicsThis is non-politics community. For political memes please go to !politicalmemes@lemmy.world

3. No recent repostsCheck for reposts when posting a meme, you can only repost after 1 month

4. No botsNo bots without the express approval of the mods or the admins

5. No Spam/AdsNo advertisements or spam. This is an instance rule and the only way to live.

Sister communities

founded 1 year ago
MODERATORS