This has been possible via the BIOS for a while now, but it's long overdue at the OS level. I love that Value keeps adding little QoL improvements to the steam deck, it's turned out to be one of the best pieces of tech I've ever bought.
this post was submitted on 09 May 2025
246 points (99.2% liked)
Steam Deck
17158 readers
30 users here now
A place to discuss and support all things Steam Deck.
Replacement for r/steamdeck_linux.
As Lemmy doesn't have flairs yet, you can use these prefixes to indicate what type of post you have made, eg:
[Flair] My post title
The following is a list of suggested flairs:
[Discussion] - General discussion.
[Help] - A request for help or support.
[News] - News about the deck.
[PSA] - Sharing important information.
[Game] - News / info about a game on the deck.
[Update] - An update to a previous post.
[Meta] - Discussion about this community.
Some more Steam Deck specific flairs:
[Boot Screen] - Custom boot screens/videos.
[Selling] - If you are selling your deck.
These are not enforced, but they are encouraged.
Rules:
- Follow the rules of Sopuli
- Posts must be related to the Steam Deck in an obvious way.
- No piracy, there are other communities for that.
- Discussion of emulators are allowed, but no discussion on how to illegally acquire ROMs.
- This is a place of civil discussion, no trolling.
- Have fun.
founded 3 years ago
MODERATORS
It’s so weird that it doesn’t have it because both my kubuntu and endeavorOS installs have it by default. Like that’s a basic feature
It was already an option in desktop mode afaik, just wasn't part of game mode.
Decky has a Powertools plugin, what I've been doing, can set per game profiles and restrict charge rates as well with that.
I do hope they focus a bit on the UI going forward - we've noticed a lot of silly little bugs while either using the Steam Deck controls or a controller.
A little hard to close a window without focus when using a controller....
load more comments
(1 replies)
Finally!!
Still can’t believe some phones don’t have this
I think it comes down to driver support. It’s not that the hardware can’t do this, but rather it’s that you need to pass the option to control it all the way up from the lowest levels of the system eventually into user space where you can select an option in settings.
That, and it’s just not the first priority on devices that are generally low-margin.
Got my hopes up there might be some sleep limit too. Would much prefer if it shuts down/hibernated after being asleep for more than 26 hours (or past a certain battery level)
The problem is that the Steam Deck APU doesn't support amd_p_state and you need to rely on auto_cpufreq. This explains why the power consumption in sleep is so high.
load more comments
(5 replies)
load more comments
(5 replies)
You know what would have made this a non-issue?
Easily user replaceable batteries.
On top of that we should have standard sizes and mandate that manufacturers use them.
IDK about non issue. I have a framework laptop, and even though the battery is very easily replaceable, I still set the charge limit to 80%.
I don't require the extra charge the majority of the time, and now I don't have to worry about replacing my battery for a much longer period of time.
Though I agree, for as serviceable as the steam deck is, a little more attention could've been paid to the battery situation.
I thought the steam deck battery wasn't too hard to replace? As long as you can handle a screwdriver.
The iFixit Guide to replace the battery on an Steam Deck (OLED)
TL;DR: Mostly screws, but the battery itself is adhered in with several adhesive strips. Be careful if you follow this guide at home as using too much heat can damage the device and/or the battery.
In summary: No, it's not that easy to replace. As someone who fixes a lot of electronics I hate this practice of adhering batteries (much less anything replaceable) into a device.
can the adhesive be dissolved with solvent? or does it need to be with done with a heat gun?
I find a mix of heat and isopropyl alcohol (at least 70%, though I prefer 99% if I'm working inside an electronic since it evaporates quickly and is less likely to cause a short due to residual liquid when you're done with the repair. Do note that 99% will likely require you to use more alcohol overall and may not be ideal.) works best to remove adhered batteries. I would say using a heating pad is a safer option than a heat gun in most cases (if set to about 72-76 degrees Fahrenheit, for about 10-15 minutes). Usually you lay the device face down (never put it on where the battery is directly touching the heating pad, too much heat can cause the battery to catch fire or explode) to loosen up the adhesive. All that being said I'm not sure how well it would work with the steam deck though since the control sticks make it hard to lay down flat, plus I don't know how the heat will affect the screen (most devices like phones are usually fine as long as it's not too hot and not too long).
If the battery is expanding you should probably not use heat and just isopropyl alcohol as inflating batteries are more at risk to catch fire or explode. If you can't, or don't want to use heat then you can just use the alcohol to slowly pick away at it, but it's going to require more patience and take longer. Also you're more likely to tear up the plastic card you're using to get the battery out.
IIRC it's glued in, and there might be other barriers beyond that
...i just assumed they knew how to keep the battery safe already... My deck has stayed plugged in and docked since i got my projector to use with it..fuuuuuck
There’s a big difference between “safe” and “ideal”
All lithium ion batteries degrade quicker at 100% vs 80 or even 60%. But it’s not going to explode and kill you.
Actually thanks, now trust you mention it i should not have used safe. I was not meaning danger, just that i might have damaged the battery life or at least put it at risk at the least. Just assumed that it came optimised to be as ideal as valve usually goes a bit overboard on their hardware from what i remember reading
Well unless you bought one of those electric bike conversion kits from Temu. Those might.
I think since the beginning if plugged in for some time it decharges to 95% so you are probably fine. You can check the battery health in desktop mode.
I really appreciate this one. Have done this on my other devices too, and while it does cut battery life by a little, your battery health will remain high for considerably longer
I implemented the same on my laptop with tlp. It is actually pretty easy to do so.
What do people set it to?
On my devices where it’s available I usually set it to 80-85%.
Default limit when toggled on is 80%, which generally seems like a good middle ground between usability and battery life. You can also raise the limit higher if you want more battery, or lower if you want to preserve the battery life better.
I thought the steam deck already had this. Admittedly, I’ve only had mine for about a month, but I don’t think I’ve ever seen it charge to 100%. I think 95% was the highest I’ve seen. It seemed like it had something similar to smart charge like Windows has.
When it charges up all the way, it stops charging and just does passthrough power instead. You can then see the battery % slowly drop over time, which is probably why you were seeing stuff like 95%
load more comments
(4 replies)
load more comments
(1 replies)
view more: next ›