this post was submitted on 04 Dec 2024
1340 points (99.4% liked)

People Twitter

5392 readers
458 users here now

People tweeting stuff. We allow tweets from anyone.

RULES:

  1. Mark NSFW content.
  2. No doxxing people.
  3. Must be a tweet or similar
  4. No bullying or international politcs
  5. Be excellent to each other.
  6. Provide an archived link to the tweet (or similar) being shown if it's a major figure or a politician.

founded 2 years ago
MODERATORS
 
top 50 comments
sorted by: hot top controversial new old
[–] A_Union_of_Kobolds@lemmy.world 137 points 3 weeks ago (5 children)

Am electrician, can confirm.

To be fair, I don't get called out to fix good work. If something's fucked, it's usually because some "handyman" who "totally knows what he's doing" was there before.

Between that, and the fact that most of the people involved in wiring up houses are just laborers under an electrician's supervision (ostensibly), yeah, I get plenty to complain about.

It also makes it easier, I feel, for customers to stomach the bill if I can adequately explain how much better off they are now that I've done my job.

[–] chonglibloodsport@lemmy.world 18 points 3 weeks ago (2 children)

Can I ask a question: do repair electricians often cross paths with install electricians? I don’t know much about the business of the trade, but my feeling was that the folks doing installs in new houses / buildings rarely crossed paths with the ones going around repairing everything. In my mind these are like two separate worlds.

[–] A_Union_of_Kobolds@lemmy.world 15 points 3 weeks ago (2 children)

Kinda depends? But yeah they're mostly separate.

When I worked for a shop (self-employed now), they had us divided into Construction and Service, and the two pretty much kept to themselves. Service guys looked down on Construction guys because they didn't know much about troubleshooting; Construction guys looked down on Service guys because most of them couldn't build their way out of a wet paper bag.

Most of my experience as an apprentice was construction. I did some service calls now and then when jobsites slowed down in the winter. Now I mostly do service calls, and, frankly, it's a HELL of a lot easier.

[–] chonglibloodsport@lemmy.world 7 points 3 weeks ago (1 children)

Okay! That matches with my impression! I have a friend who works in construction (drywall taper) and the guy works insanely hard, always comes home from work covered head to toe in mud or dust, and is pretty much always sore. Great guy, very friendly beer drinking buddy! But that’s a kind of work I could never do, at least working for someone else.

The troubleshooting nature of repair/service electrical seems vastly more appealing to me, though I imagine with enough experience 90% of the faults become routine!

[–] A_Union_of_Kobolds@lemmy.world 8 points 3 weeks ago (4 children)

Yeah I don't envy drywallers. That is exhausting work, especially since a lot of them get paid by the sheet. There's a running joke in construction about them constantly leaving soda bottles full of piss because they can't take the time to go to the john.

Electrical construction (I mostly did commercial fwiw, but dabbled in residential and industrial as well) can be pretty rough too. Other than the brief time I worked with the union, you're pretty much expected to bust ass all day every day, forever. It was... not fun, most of the time.

But you're right on the last point too - once you really understand the system, most faults can be tracked down and figured out pretty quickly. After all, electricity is basically binary - either the circuit works, or it doesn't, in which case you just keep following it back to the part where it does work, and now you can find the problem.

It's not always that simple, like if multiple circuits are sharing a neutral, or you've just got a loose neutral connection... but as you may guess, if you've got power where you're supposed to but the thing still won't work, the problem is the neutral. So... it's still kinda simple lol. There's only so many parts to a circuit after all.

load more comments (4 replies)
load more comments (1 replies)
[–] Fubarberry@sopuli.xyz 5 points 3 weeks ago (2 children)

Repair electricians definitely run into the work of install electricians, but my experience is they're mostly two different groups. Install electricians may come back to do repairs on their own work, or if there's a lull in new construction jobs they can pick up they might fill in the hours with some smaller repair jobs.

There are some some more specialized electricians that do a mix of both, for example my company is mostly generator focused. We're involved in both new construction and repairs for things that are generator/transfer switch/solar related.

load more comments (2 replies)
[–] Fubarberry@sopuli.xyz 6 points 3 weeks ago (1 children)

Yeah, there's a lot of questionable work out there. Many homeowners underestimate the difficulty involved in some repairs too, so there's definitely a need to justify why it took as long as it did.

[–] anomnom@sh.itjust.works 8 points 3 weeks ago

Even if it doesn’t take long, it’s helpful for some if they get an explanation that shows your expertise. Which is lots of what they’re paying for usually.

load more comments (3 replies)
[–] Blue_Morpho@lemmy.world 94 points 3 weeks ago (2 children)

My previous house was a new build. I had some weird electrical problems. I called the builder and they sent someone out.

The guy looked at my panel and said, "Oh yeah, I remember this house. We had to fire the electrician who wired your house because he was always showing up high."

[–] prettybunnys@sh.itjust.works 52 points 3 weeks ago (5 children)

I had a new storm door installed through Lowe’s and the contractor they contracted to do it showed up real nice, we talked, then he went off and smoked meth and did the best fucking job I’ve ever seen.

50/50 I guess.

[–] NielsBohron@lemmy.world 27 points 3 weeks ago

There's high and then there's high on meth.

[–] MrShankles@reddthat.com 17 points 3 weeks ago (3 children)

I had a gas stove installed by Lowe's. The guys that installed it couldn't figure out how to get the gas to stop leaking, but wouldn't admit they had no idea what they were doing. They told me I would have to turn the gas valve off at the connection when I wasn't using the stove

I stopped trying to explain and let them leave, because I was over it. Installed the connection myself, I was just happy I didn't have to move it or the old one

I did call Lowe's and let them know about it though, so that those guys wouldn't inadvertently kill someone with their installations

50/50 for sure lol

[–] Buddahriffic@lemmy.world 11 points 3 weeks ago (1 children)

Just install a barbeque lighter near the leak and set a timer to regularly light it and just flare off anything that has leaked since the previous flare. Then, when rebuilding after the fire, add a pressure sensor to the new setup that reduces the interval if the pressure increases beyond what it was when the interval was first calibrated.

load more comments (1 replies)
load more comments (2 replies)
[–] roguetrick@lemmy.world 6 points 3 weeks ago (2 children)

Listen if all you're doing is storm door build outs you get pretty good at it even when you're smoking meth.

[–] prettybunnys@sh.itjust.works 4 points 3 weeks ago

Actually I’m misremembering, he did the front door as well as the storm door.

Installed new trim and repaired some exterior wood rot he found and fixed the trim above the door so it would stop leaking lmao.

All those things were supposed to be extra charge but he just did them and that was that.

load more comments (1 replies)
load more comments (1 replies)
load more comments (1 replies)
[–] surph_ninja@lemmy.world 70 points 3 weeks ago (4 children)

What’s fun is criticizing someone’s code and lack of proper comments/documentation, and then realizing you wrote it 3+ years ago.

[–] sum_yung_gai@lemm.ee 32 points 3 weeks ago

My main project is in a private repo with me as the sole dev but I swear there is some dumbass pushing shitty code.

[–] Notorious_handholder@lemmy.world 14 points 3 weeks ago

At first I get embarrassed when that happens. But then I take a little pride in knowing that means I've grown in knowledge in my field... Then I get mad at how past me was so dumb and now I have to fix HIS stuff! Screw that guy

[–] ICastFist@programming.dev 5 points 3 weeks ago

Some days ago, I was complaining about some asinine decision on one of the systems I have to take care of with a programmer. The programmer then remembered that the thing I was complaining about was something that I asked to be added in the first place. He also reminded me of the why, but that knowledge simply made me wonder what the fucking fuck I was thinking back then.

load more comments (1 replies)
[–] chiliedogg@lemmy.world 39 points 3 weeks ago

I work in municipal development. I was driving by and saw a hellscape development starting up and blocking traffic in the middle of Rush hour. So I pulled over, put on my City reflective vest, and went out to see who the hell authorized them for this bullshit.

They pulled out a permit with my signature on it.

[–] elbucho@lemmy.world 31 points 3 weeks ago (2 children)

I was doing some construction work this past weekend, and encountered some wiring that I did about 20 years ago. I spent the first 5 minutes complaining about the crazy asshole who wired it up, knowing full well that it was me. I am in this picture and I do not like it.

[–] Ookami38@sh.itjust.works 16 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

I feel like this is just a sign of good growth. I'd be AMAZED if any single person looks at work they did 20 years prior, and said "yep. That's my best work." Maybe arts, where there's no objectivity, but anything you can actually quantify?

[–] Dasus@lemmy.world 9 points 3 weeks ago (5 children)

Middle-aged professional athletes, perhaps?

load more comments (5 replies)
[–] ZombiFrancis@sh.itjust.works 6 points 3 weeks ago

I did elder care facility maintenance work 20 years ago and am confident/hope all of my work has been rightfully undone and replaced by someone who gave more of a damn.

I still remember my sprinkler system wiring giving me a warm buzz every time I had to manually switch zones because my wiring was such ass.

God I hope they've fixed that.

[–] HaveYouPaidYourDues@lemmy.world 31 points 3 weeks ago

I always tell every apprentice i work with that they need to make sure they weren't the last guy to touch ut when they start bitching about the dumbass that came before them

[–] OwlPaste@lemmy.world 29 points 3 weeks ago (1 children)

That is part of my job description (SW Engineer)

[–] CameronDev@programming.dev 38 points 3 weeks ago (1 children)

The best part is, the previous person is usually yourself.

[–] webadict@lemmy.world 44 points 3 weeks ago (2 children)

That guy is the worst fucking developer I've ever known.

[–] Crazyslinkz@lemmy.world 11 points 3 weeks ago (1 children)

Give em a break at least they are learning and getting better. They notice thier previous mistakes!

[–] OwlPaste@lemmy.world 5 points 3 weeks ago* (last edited 3 weeks ago)

And mark them with a TODO... Git blame is telling me it's only 5 years old... Sure it would get resolved any day now...

load more comments (1 replies)
[–] MadBob@feddit.nl 18 points 3 weeks ago (1 children)

I have a couple of colleagues in the kitchen where I work who stand babbling, as if in a daze, if they see a mistake's been made, sometiems for up to a minute. Very frustrating for me, as I prefer to just solve the problem. I remember one time holding my hand out to ask for the pan as my colleague stood with it, stirring it with a pair of tongs, repeatedly muttering that there weren't enough peas in the linguine, and I was saying, fine, then give me the pan and I'll chuck more peas in, but she just kept yammering away. Really fucks me off, haha.

load more comments (1 replies)
[–] Skullgrid@lemmy.world 17 points 3 weeks ago

Turns out that if you were doing software development but using wires instead, it's even more cumbersome, difficult and open to shitty solutions that other idiots before you tried out, and will also be fixed by idiots after you.

Because you know, solutions to problems are hard. And we all suck.

[–] saltesc@lemmy.world 14 points 3 weeks ago

So instead... You look at the situation in disbelief, cursing, complaining, scoffing. Then you see a comment line and realise it's your code from two years ago and you had the audacity to put your name to it like it might be a legacy worth preserving one day.

[–] ChickenLadyLovesLife@lemmy.world 13 points 3 weeks ago (4 children)

I worked on one project that was essentially one main app and then a plugin architecture where other companies could write modules that would be run inside the main app. My explicit instructions were to make it very difficult to actually write one of these modules (so that our competitors could not actually be competitive) and boy did I deliver! If my company had really wanted to deliver something like this that actually worked (in the sense of other companies being able to make real contributions) it would have been trivial to make everything HTML-based web apps.

I had to endure a roasting session where some junior developers laid into "grampa" for his absurdly bad design decisions. I suppose I deserved it, though, for my poor ethical choices.

load more comments (4 replies)
[–] HuntressHimbo@lemm.ee 12 points 3 weeks ago (6 children)

As a software developer and sometimes home electrician, I am so glad that house wiring doesn't support git blame, but it would be nice to know who not to hire because the work in my house when I purchased it was appalling

load more comments (6 replies)
[–] i_stole_ur_taco@lemmy.ca 11 points 3 weeks ago (1 children)
[–] ByteOnBikes@slrpnk.net 11 points 3 weeks ago (1 children)

Nope doesn't count. Me from a month ago is a whole different person. Fuck that guy.

[–] SapientLasagna@lemmy.ca 7 points 3 weeks ago

And future me? What has that guy ever done for me? Fuck that guy too.

[–] dragonfucker@lemmy.nz 11 points 3 weeks ago

This right here is the proof that programmers are engineers.

[–] Ensign_Crab@lemmy.world 9 points 3 weeks ago (1 children)

I was about to say "Yeah, but electricians are pissed off because if they fuck up, fire happens."

But then I remembered THERAC-25.

load more comments (1 replies)
[–] Eyedust@sh.itjust.works 8 points 3 weeks ago

My dad was a carpenter who did some electrician work. Can confirm. Living in any house not built by him was worth two years of complaining and a year of fixing it. Other than that, it was hard to frustrate him with anything else. Cool as a cucumber. Did beautiful work, too.

[–] AbsoluteChicagoDog@lemm.ee 7 points 3 weeks ago* (last edited 3 weeks ago)

The worst is when you're also the previous engineer

Yup. I had the furnace guy over and he complained about a surge protector the previous guy put on (apparently put in on wrong). It guess it comes w/ the territory.

[–] gamermanh@lemmy.dbzer0.com 4 points 3 weeks ago (3 children)

Lol, my current house's wiring is a bunch of DIY bullshit that even an ex-electrician spent an hour trying to figure out before telling me to pay for someone to take the time to get it fixed

They turned one of the light switches by the "front" door into a dummy plate, wired it and the fan to 2 switches in what used to be a spot for a plug, and managed to tie that whole system to the kitchen light and the outside porch light

Cannot find a consistent path with a multimeter to save our fucking lives, I gave up and we just don't have our kitchen light working for like 1.5 years

[–] ChickenLadyLovesLife@lemmy.world 6 points 3 weeks ago (1 children)

I bought a house last year and I was somewhat mystified by why the two light switches next to the door were horizontal instead of the normal vertical arrangement. Turns out they had tried to turn a single box into a double by basically just gouging a bigger hole in the cinderblock wall and filling it with a softball-sized lump of caulk into which they stuffed the two switches; somehow they could only get this whole mess to stay in place by putting the switches horizontally. For bonus points, one of the switches did nothing except producing a distant humming noise and then tripping one of the breakers after a few seconds.

[–] gamermanh@lemmy.dbzer0.com 4 points 3 weeks ago (1 children)

Oh, hey, this guy lived at the same house as me!

The plug-turned-switch at my place is also 2 switches sideways where they don't really fit!

Distant humming and tripping the breaker sounds like arcing in the walls, beautiful and safe <3

load more comments (1 replies)
load more comments (2 replies)
load more comments
view more: next ›