"Oh, I forgot to turn the PSU back on"
this post was submitted on 30 May 2025
557 points (98.9% liked)
Lemmy Shitpost
31810 readers
4548 users here now
Welcome to Lemmy Shitpost. Here you can shitpost to your hearts content.
Anything and everything goes. Memes, Jokes, Vents and Banter. Though we still have to comply with lemmy.world instance rules. So behave!
Rules:
1. Be Respectful
Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.
Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.
...
2. No Illegal Content
Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.
That means:
-No promoting violence/threats against any individuals
-No CSA content or Revenge Porn
-No sharing private/personal information (Doxxing)
...
3. No Spam
Posting the same post, no matter the intent is against the rules.
-If you have posted content, please refrain from re-posting said content within this community.
-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.
-No posting Scams/Advertisements/Phishing Links/IP Grabbers
-No Bots, Bots will be banned from the community.
...
4. No Porn/Explicit
Content
-Do not post explicit content. Lemmy.World is not the instance for NSFW content.
-Do not post Gore or Shock Content.
...
5. No Enciting Harassment,
Brigading, Doxxing or Witch Hunts
-Do not Brigade other Communities
-No calls to action against other communities/users within Lemmy or outside of Lemmy.
-No Witch Hunts against users/communities.
-No content that harasses members within or outside of the community.
...
6. NSFW should be behind NSFW tags.
-Content that is NSFW should be behind NSFW tags.
-Content that might be distressing should be kept behind NSFW tags.
...
If you see content that is a breach of the rules, please flag and report the comment and a moderator will take action where they can.
Also check out:
Partnered Communities:
1.Memes
10.LinuxMemes (Linux themed memes)
Reach out to
All communities included on the sidebar are to be made in compliance with the instance rules. Striker
founded 2 years ago
MODERATORS
Load bearing dust
Remember to hold your fans in place and prevent them from being spun by compressed air. If they spin fast enough they can generate enough current to cause damage.
I doubt that. It's definitely so the bearing doesn't break.
This is very good advice, I like to spin mine with the compressor going "VROOM VROOM" but I guess it would make sense that they will back feed some voltage to the pins that way.
Never had a problem tho
It will only happen if the fan has permanent magnets. Still, just stop the blades. No reason to put wear on the bearings
and if at any point you had to disconnect your fans for cleaning do not forget to connect them back in. the fans are not optional components. modern PCs and laptops will straight up refuse to turn on if they can't detect the fans
Meanwhile, my laptop has no fans.
could you elaborate? i don't think current technology with more computational power than a phone can survive without fans
Often this is because of those little shit pin connectors for the power button getting pulled loose. How has a better, standardized option not been made for those yet?
Also remember to flip the switch on your power supply
remember to plug the cord back into the power supply
Remember to press the power button (!)
And remember to have a computer
Remember to have power
remember to flip the breaker from last house fire
remember to have a house
remember
Pretty much every motherboard in the last 10 years has shifted to the “Intel Standard” layout:
Most midrange to high end cases have a single connector that fits right on there, for compatibility they include a breakout adapter.
There's so many mobo connectors that clearly were not designed with cycle count in mind.
USB 3 connectors, for starters. Unplugged mine for the third time to change motherboards and a couple pins just ripped out so now only one front USB works
The pinouts on motherboards actually has been mostly standardized, it’s just that case manufacturers can’t guarantee that your putting a motherboard in with that standard layout
Yours isn’t dishwasher safe?
Forgot to add the detergent
Never touch a running system
I spent 20 years as an IT admin. We used cans of compressed air to clean dust out of computers. Light, gentle sprays, preferably cleaned outside so the dust doesn't just fill the room.
If you hold down the spray button for a few seconds, the can turns ice cold really fast, so be sparing with it. Also, don't tip it upside-down while spraying or it'll spray liquid that can damage computer components.
In all the years blowing dust out of computers, the only time I actually damaged a computer was when I tried to use a vacuum hose blowing air in reverse. It was too rough and broke some motherboard components.
I work in a shop with compressed air for air guns and I use it on the insides of computers all the time to clean out the dust and haven't ever broken anything.
If you’re using air compressors, you should consider adding a moisture filter on your air gun. When the air gets compressed, it gets hot. And hot air can hold more moisture. Then when you spray it, that air cools back down and the moisture re-condenses as it leaves the system. You can very easily fuck up electronics because you blew a bunch of water mist into the connections at 60 PSI.
It’s also why (unless you’re using a compressor specifically designed for it) you should be opening the dump valve and draining it entirely after you’re done using it. Don’t just let it sit with compressed air in the tank for weeks at a time. All of that humidity will slowly condense as the air in the tank cools, and you’ll end up with liquid water inside of your tank. And that’s how rust happens. If you never empty your compressor, you’re not only spraying rusty water everywhere; You’re working with a time bomb. It may explode in a year, or five years, or fifty… But that rust will slowly eat away at the internals, and weaken components that are designed to hold a LOT of pressure.
Source: I live in a humid area and occasionally use air compressors to clean electronics.
I fix broken computers and rebuild them from scrap parts, that's all to much hard work, this is Thunderdome bro
We used the compressed air all day everyday for air guns for vehicle lifts, it is constantly running and constantly being used. It also automatically drains. It's quite an expensive setup for a large dealership.
I believe that vacuums also generate a ton of static charge as the air flows over the plastic hoses and such. They make special vacuums for electronic that are static free but expensive.
https://metrovac.com/collections/electronics-it/products/datavac-electric-duster
Those things are amazing though, I've had one for over a decade now and it's the best 100 dollars I ever spent.
My fear every time
Never actually happened, but still
Check if maybe any dust got into the connectors. Prone to thus is the PCIE connector on the motherboard, when removing the GPU. Just blow into it to make sure its dust free. Happened to me more than once.
Is it connected?
Happened to me once, my wife won't let me forget it
Yea 409 isn’t the best for the longevity of a PC.
it reminds me of that Macbook vs thinkpad meme.