this post was submitted on 29 Aug 2024
326 points (96.8% liked)

Casual Conversation

1463 readers
223 users here now

Share a story, ask a question, or start a conversation about (almost) anything you desire. Maybe you'll make some friends in the process.


RULES

Casual conversation communities:

Related discussion-focused communities

founded 1 year ago
MODERATORS
 
top 50 comments
sorted by: hot top controversial new old
[–] thelakesman@lemmy.world 1 points 5 days ago

Mad max vibe

[–] plactagonic@sopuli.xyz 36 points 2 weeks ago (2 children)

I am no expert, but I think that it's more off road than most of the M'rican tanks (especially the Cybertruck)

[–] Zorsith@lemmy.blahaj.zone 20 points 2 weeks ago* (last edited 2 weeks ago) (2 children)

Murican trucks are pavement princess short-bed towtrucks rather than haulers and offroaders now, sadly. I'd love an affordable open-bed hauler with some modern creature comforts (good AC, heated steering wheel, defrosting windshield/rear-window, ventilated seats, android auto, relatively low bed-height for easy loading)

[–] metaStatic@kbin.earth 3 points 2 weeks ago (4 children)

real pity GM killed off Holden. not really in the know but the last utes should be quite recent if expensive for a Murican to get hold of in left hand drive.

[–] noxy@yiffit.net 5 points 2 weeks ago (8 children)

gotta be 25 years old or older to register an imported car here sadly

tho 25 years ago is a lot more recent than it feels to my ancient ass

load more comments (8 replies)
load more comments (3 replies)
[–] Anticorp@lemmy.world 3 points 2 weeks ago* (last edited 2 weeks ago) (1 children)

Depends on the model. The Colorado and Ranger are both excellent off-road vehicles. The Colorado won truck of the year last year, even beating out the Toyota Tacoma. It's a 4x4 with great off-road handling, but it still drives nice on the road, and it can pull 7000 lbs. It's a really nice all around truck, for people who want a truck to do truck stuff with.

[–] nilloc@discuss.tchncs.de 3 points 2 weeks ago

The Colorado is a mid sized truck in name only.

It shares its L3B engine with the full-size Silverado.

Despite being a mid-size, in some dimensions it is somewhat bigger than the full-size Silverado, being built around the same chassis and frame while sharing the same L3B engine.

[–] metaStatic@kbin.earth 7 points 2 weeks ago (1 children)

That's should read Yank Tank or Emotional support vehicle

load more comments (1 replies)
[–] iamericandre@lemmy.world 30 points 2 weeks ago (1 children)

There’s a mini cooper on my local Craigslist that is modded like this and I think it rocks

[–] NineMileTower@lemmy.world 18 points 2 weeks ago (1 children)

I don't have the skills to do this kind of thing, but I would.

[–] iamericandre@lemmy.world 48 points 2 weeks ago (2 children)
[–] NineMileTower@lemmy.world 16 points 2 weeks ago (1 children)

That's wild. Off-roading with a spot of tea.

[–] iamericandre@lemmy.world 9 points 2 weeks ago (1 children)

Honestly if the mod is done well I’d drive the hell out of either of these

[–] TachyonTele@lemm.ee 5 points 2 weeks ago

I usually don't like most kits, but I agree, this just looks fun.

load more comments (1 replies)
[–] krigo666@lemmy.world 27 points 2 weeks ago (1 children)
[–] lime@feddit.nu 17 points 2 weeks ago

this one makes me sad, because the DS is so mechanically clever and sleek looking... they've ripped out the neat innards and offset all the panels :(

[–] nifty@lemmy.world 15 points 2 weeks ago (3 children)

I like the concept, it’s hilarious. I say go bigger

[–] AngryCommieKender@lemmy.world 3 points 2 weeks ago (1 children)

One of my neighbors jacked up an old school VW bug. The thing is the same height as my sprinter van, or 96" / 8' tall. It's totally ridiculous and awesome at the same time. He normally has it parked at his shop, since he built it as an advertisement of what he can do, so I can't provide a picture right now, but I will try to remember to post a pic when I can.

[–] nifty@lemmy.world 4 points 2 weeks ago

As long as they’re safe, outrageous car mods are awesome

load more comments (2 replies)
[–] noxy@yiffit.net 14 points 2 weeks ago (1 children)

That Miata absolutely fucks.

Were I a dragon I would take it in a dragonsfuckingcars-ly fashion

[–] TheReturnOfPEB@reddthat.com 3 points 2 weeks ago (1 children)

i hate that was i born too late to use "fucks" as adjective of estimation.

load more comments (1 replies)
[–] atocci@lemmy.world 12 points 2 weeks ago (4 children)

Man, how do you accomplish something like this? And how much would it cost?

[–] SirDerpy@lemmy.world 17 points 2 weeks ago (2 children)

There's two ways: Modify a Miata; Make something look like a Miata.

Most would think it's easier to modify a Miata. That's sorta true. One could relatively easily replace the suspension, rims, and tires to make it look like the OP. But, the first time it's off-road it'll likely bend the frame.

The frame needs to be reinforced to function off road. That's generally a huge pain in the ass. It's much easier to shorten the frame of an existing SUV or light truck then attach the Miata's body and panels to it. It's much easier to make a truck look like a Miata than make a Miata into a truck.

But, this particular vehicle is very lightweight. Frame reinforcement might be much easier. A Miata hobbyist or Mazda mechanic would know because there's likely only one way that makes good sense for this specific model. My best guess is that because the Miata frame needed very little it was chosen for this purpose. I'd guess it's a modified Miata.

Next time ask the owner anything. Everyone who owns something like this is dying to tell others all about it.

[–] grue@lemmy.world 4 points 2 weeks ago (1 children)

I'm no expert, but I'm guessing that something like https://flyinmiata.com/products/flyin-miata-butterfly-brace-v2-0 + a full roll cage would probably do the trick.

[–] SirDerpy@lemmy.world 3 points 2 weeks ago* (last edited 2 weeks ago) (1 children)

I've enough expertise to be certain that would do the trick. That bypasses the frame modification for not even $1k.

[–] grue@lemmy.world 3 points 2 weeks ago (1 children)

I mean, the "full roll cage" part would definitely put the total well over $1k. But I suppose you might be able to get away with just the butterfly brace alone if your goal was solely to stop it folding in half when it hit big bumps and not, you know, being safe or good in general.

(Also if you didn't have a roll cage then you probably really ought to have at least a hardtop -- for both rigidity and safety reasons -- and I believe that alone is over $1k at this point, too.)

load more comments (1 replies)
[–] NineMileTower@lemmy.world 7 points 2 weeks ago

I do not know. I was at Silver Lake State Park sand dunes in MI and there were a TON of crazy homemade and custom vehicles flying around the dunes.

[–] Wogi@lemmy.world 6 points 2 weeks ago

When there's a drill there's a way.

And between "my buddy cleetus PAID me to take trash off his hands and I turned it in to a sick off-road Miata" and "I have mortgaged my home twice, my wife left me, and I owe 350,000 dollars to some shady Iranians on top of that"

load more comments (1 replies)
[–] Thcdenton@lemmy.world 7 points 2 weeks ago (1 children)

I'll raise you my matrix lol

[–] NineMileTower@lemmy.world 5 points 2 weeks ago

Matrix: Reloaded

[–] boaratio@lemmy.world 7 points 2 weeks ago

Black metal.

[–] TheReturnOfPEB@reddthat.com 7 points 2 weeks ago* (last edited 2 weeks ago)

That is a Makiata

[–] Gaboose@lemmy.world 6 points 2 weeks ago

I don’t know if folks still do it, but when Miatas first came along, some people dropped v8 engines into them (the nickname for those cars was “monster Miatas”)

[–] zdanger@lemmy.world 6 points 2 weeks ago* (last edited 2 weeks ago)

My buddy is in the process of building an offroad Exocet which is based on the Miata subframes. https://exomotive.com/exocet/off-road/

[–] m0darn@lemmy.ca 6 points 2 weeks ago (1 children)

Anyone interested in this should check out superfastmatt (YouTube) he has a video series where he converts a Dodge Viper for offroading.

Not bolting a viper body onto a dune buggy frame.

[–] Comment105@lemm.ee 2 points 2 weeks ago* (last edited 2 weeks ago)

It's such an incredibly scuffed build, though. Matt is a madman.

He shoved a ham sandwich and a bunch of other shit in a carbon fiber mold to make a point about arbitrary it is what you put in them (and I think he was running low on chopped carbon tow), then he had to dig out the sandwich later and fix it because that one was too much.

That wasn't for the Dodge, though. That was for a custom built salt flats speeder. Fucking wild dude.

[–] perviouslyiner@lemmy.world 5 points 2 weeks ago* (last edited 2 weeks ago) (2 children)
[–] NineMileTower@lemmy.world 5 points 2 weeks ago

That's badass.

load more comments (1 replies)
[–] DJDarren@thelemmy.club 5 points 2 weeks ago

Is there a Lemmy equivalent to /r/Battlecars, because if there is they’d love this.

[–] FireWire400@lemmy.world 3 points 2 weeks ago* (last edited 2 weeks ago) (3 children)

I might be in the minority here but that's a fucking travesty right there...

[–] NineMileTower@lemmy.world 4 points 2 weeks ago (1 children)

Beauty is subjective, friend. I take no issue with your views.

[–] FireWire400@lemmy.world 3 points 2 weeks ago* (last edited 2 weeks ago) (1 children)

Me neither; there wasn't any offense intended with my post, sorry if you took it as such.

I just like Miatas and I think that people who also like Miatas (should) treat them better than that.

load more comments (1 replies)
load more comments (2 replies)
[–] exanime@lemmy.world 3 points 2 weeks ago

I honestly like these "small car, big feet" style. It reminds me of dune buggies. Does this style have a name?

Maybe in 2 more lifetimes I will be born rich enough to entertain a car hobby

[–] HydraulicMonkey@lemmy.world 2 points 2 weeks ago* (last edited 2 weeks ago)

Mighty car mods did a similar project with a Nissan Silvia rather than a Miata, if anyone is interested.

https://youtube.com/playlist?list=PLp0KnUFYB--g_NcNczfkXW_T7izPjMHcI&si=4P77qrv9FgxNjoSE

load more comments
view more: next ›